Touch Pad - Panasonic CF-R1Series Operating Instructions Manual

Touch Pad

Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer operations.
NOTE
By design the touch pad is to be used with a finger tip only. Therefore, do not use any
other type implement on the touch pad, i.e. stylus, pen, or pencil eraser.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
NOTE
Refer to [Mouse Properties]* for information on basic operations other than the above.
Windows 2000
*
: [Start] - [Settings] - [Control Panel] - [Mouse]
Windows XP
: [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]
Handling the Touch Pad
Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens).
Try to avoid having any harmful substances such as oil, come in contact with the touch pad.
The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on the
second tap leaving your fin-
ger down (applying pres-
sure) and moving it on the
work surface.
Trace the circumference work surface.
clicking
double-clicking
While holding down the but-
ton, moving your finger on
the work surface.
17