User's Manual
"On wall" satellite speakers
We thank you very much for choosing Waterfall Audio speakers. Our deliberate design
choice for aesthetics and high performance is constantly guiding our research and
development, leading us to major new innovations.
In order to take advantage of the exceptional qualities of our speakers, we recommend
you read this manual very carefully. For optimal performance we highly recommend
the use of a Waterfall High Force Subwoofer.
Warning : GLASS. FRAGILE : HANDLE & USE WITH CARE.
Important instructions to be read before use
• The speaker you have purchased incorporates one GLASS PANEL.
• Any Impact on the product could potentially damage the product.
• There is a potential risk of injury to persons if the product is not used as instructed.
• In the event the speakers break, DO NOT attempt to pick up the pieces of glass of the speaker without first
protecting your hands and using appropriate tools in collecting the pieces of the speaker.
USE CAUTION WHEN UNPACKING, REPACKING, INSTALLING AND USING THE PRODUCT.
1) Connecting the Serio satellite to the Amplifier :
The satellites should be directly connected to the speaker output of your power amplifier or
Audio Video Processor. Always check the correct polarities have been used : (+) red, (-) black.
Never plug the satellites directly into the mains supply.
We highly recommend the use of Waterfall Audio
Cable made up with a high quality oxygen free copper,
which you can purchase from your Waterfall dealer.
The back part of the speaker case has 2 grooves
through which the Waterfall cable can be inserted.
2) Installation :
a) on wall
1
2
www.waterfallaudio.com
Sério
FRAGILE
1) Before any fixing please ensure
that no electric wire or any pipes
will be sectioned in the wall. Make
3
sure that the bracket is strongly
fixed to the Wall.
2) Slide the cable through the
groove at the back and then slide
the satellite on to the wall bracket.
3) Lock the 2 screws at the bottom
the speaker with the supplied key.
-
+