INFORMATIONS & OPERATING INSTRUCTIONS Thank you for choosing Waterfall Audio speakers. Our deliberate choice for aesthetics and performance constantly guides us towards cutting-edge technologies design combined with major innovations. The Hurricane in-wall is designed to work in perfect symbiosis with all Waterfall Audio loudspeakers, and is strongly recommended for use with a Waterfall Audio subwoofer.
UNPACKING AND INSTALLATION STEP 1 Open and remove the upper protective wedges then remove the 4 screws holding the front panel. Separate the front from the back box. STEP 2 Cut out the partition using the template provided. Be sure to check its horizontality before starting cutting using a level.
INSTALLATION STEP 3 Connect the cables from the front to the terminals of the back box (respect the + and - polarities) then place the front panel + glass in the back box (be careful not to pinch the cables). STEP 4 Gradually tighten the 4 screws to permanently attach the...
Never connect two speakers in parallel (or in series) on the same channel. Never connect your speakers to the mains. The "Waterfall Audio" cable is made from very high quality deoxygenated copper that is particularly well suited to your speakers. It is available from your dealer.
Page 6
WATERFALL AUDIO ZA les praderies - 83 570 Carcès - France waterfallaudio.com Made in France, 5 years warranty on speakers, 2 years warranty on amplifiers (parts& service). We operate a policy of continuous improvement and reserve the right to amend designs and specifications without prior notice.