Advertisement
Quick Links
Advertisement
Related Manuals for Waterfall Audio SERIO
Summary of Contents for Waterfall Audio SERIO
- Page 1 M A D E I N F R A N C E INSTRUCTIONS MANUAL COMPACT SPEAKER SERIO...
- Page 2 The speakers can also be placed on a flat surface using the rubber knobs supplied as standard. The Serio is designed to work in perfect symbiosis with all Waterfall Audio loudspeakers. It is strongly recommended that they be combined with a Waterfall Audio subwoofer.
- Page 3 INSTALLATION WITH STANDARD WALL BRACKET (supplied as standard) The speaker's diffusion parameters allow it to be installed at different heights depending on your installation and integration criteria. The minimum possible height from the bottom of the speaker to the floor is 700mm; the maximum is 1500mm. (see next page for the positioning of the wall bracket).
- Page 4 Distance bottom = distance Floor/ of speaker /Floor Fixation holes (in mm) (in mm) Wall Bracket 1000 1062 Standard 1100 1162 1200 1262 1300 1362 1400 1462 1500 1562 Floor STEP 1 The speaker weighs 0,70 kg. It is your responsibility to ensure that this load can be accepted and to define the appropriate technical solution for fixing the speaker to...
- Page 5 STEP 3 Pass the 2 cables through the grooves. Check for polarities. STEP 4 Slightly loosen the 2 screws that tighten the clamping system. STEP 5 Connect the speaker (making sure that the + and - polarity are correct) and place it on the bracket. Rotate it to the desired orientation.
- Page 6 INSTALLATION WITH 15° WALL BRACKET (optional) If the loudspeaker is to be positioned high up (over 2,0 meters), we recommend using the 15° wall bracket to orientate it towards the listener and maintain optimum frequency response (see next page for wall bracket positioning).
- Page 7 Distance bottom = distance Floor/ of speaker /Floor Fixation holes (in mm) (in mm) Wall bracket 1800 1862 15° 1900 1962 2000 2062 2100 2162 2200 2262 Floor STEP 1 The speaker weighs 0,70 kg. It is your responsibility to ensure that this load can be accepted and to define the appropriate technical solution for fixing the speaker to...
- Page 8 STEP 3 Pass the 2 cables through the grooves. Check for polarities. STEP 4 Slightly loosen the 2 screws that tighten the clamping system. STEP 5 Connect the speaker (making sure that the + and - polarity are correct) and place it on the bracket. Rotate it to the desired orientation.
- Page 9 INSTALLATION WITH RUBBER KNOBS (SUPPLIED) Serio has rubber knobs, so that it can be placed on a flat surface such as a low cabinet or shelf. The diffusion parameters allow positioning at different heights depending on the direction of the speaker and your installation and integration criteria.
- Page 10 STEP 1 Position the first 2 knobs on the bottom part of the glass panel. Insert the last knob on the backside of the speaker. STEP 2 Connect the speaker. (be sure to observe the + and - polarities). Pass the cable through the grooves STEP 3 Position the speaker in its final location.
- Page 11 CEILING INSTALLATION WITH THE STANDARD WALL BRACKET (included in box) Thanks to the Serio's low weight and standard wall bracket, it is possible to place the speaker on the ceiling, either as a surround or as a ceiling speaker. For the surround position, they need to be tilted at 45° and for the ceiling position it is recommended that they be left upright (with the glass parallel to the ceiling).
- Page 12 STEP 1 In order to be able to rotate the speaker and direct it towards the listening area, it is recommended that you fix the bracket with just one screw (the middle one) with a 4mm diameter countersunk head (not supplied). If there is no need to orientate the speaker, attach the bracket with 2 screws, adjusting the level.
-
Page 13: Connection To Your Amplifier
ACOUSTIC SET UP AND CONFIGURATION Despite its compact size, the Serio can handle a lot of power thanks to its 'Heatstream' technology. Your choice of amplifier should be a quality model with between 50 Watts and 100 Watts per channel. - Page 14 SET UP & CONFIGURATION IN HOME CINEMA MODE Your A/V processor has a "Sub Pre Out" output, connect it via the modulation cable (not supplied) to one of the two "Low level Input" on your subwoofer (either L or R). If it has an XLR output, connect it via an XLR cable (not supplied) to the XLR input on your subwoofer.
- Page 15 SET UP OF YOUR WATERFALL AUDIO SUBWOOFER • Switch "24-12-LFE" to the LFE position (note: on LFE the FREQ button is inactive, the crossover frequency is generated by the processor). • Adjust the volume ("LEVEL") as required. • PHASE: depending on the processor's bass management settings and certain distance parameters, phase inversion (180°) may be...
- Page 16 SET UP AND HI FI CONFIGURATION (amplifier with PRE OUT outputs) Connect the PRE OUT outputs of your stereo amplifier to the two "Low Level Input" inputs of the subwoofer amplifier. Do not use the Hi Level Inputs. Connect the speakers, making sure that the polarity is correct. Never connect two speakers in parallel on the same channel.
- Page 17 HIFI SET-UP AND CONFIGURATION (amplifier without PRE-OUT outputs) Connect the speakers outputs of your stereo amplifier to the two “High Level Inputs"of the subwoofer amplifier. Connect the speakers, making sure that the polarity is correct. Never connect two speakers in parallel on the same channel.
- Page 18 Check more on www.waterfallaudio.com (warranty section). IN THE EVENT OF RESALE THE PRESENT THE DOCUMENT HAS TO BE INCLUDED WITH THE PRODUCT WATERFALL AUDIO ZA les praderies - 83 570 Carcès - France waterfallaudio.com Made in France, 5 years warranty on speakers, 2 years warranty on amplifiers (parts& service).