Cassette Player Features; Playing Cassette Tapes; Fast Forwarding And Rewinding Cassette Tapes - Kenwood KRC-108S Instruction Manual

Cassette player features

SRC /
0
PWR OFF
T.CALL
T.CALL indicator

Playing Cassette Tapes

Loading and Playing Cassettes:
REW FF
Load a cassette with the tape exposed on the right.
The tape starts playing automatically.
With side A facing up, the 3 indicator lights up when side A is
playing, and 2 when side B is playing.
The 2 3 indicator lights up while play is paused.
KRC-108S
Playing Cassettes Already Loaded:
Press the SRC (source) button repeatedly to select the tape
mode. "TAPE" is displayed when the tape mode has been
selected.
Listening to the other side:
Press the FF button and REW button at the same time.
Tape play switches to the other side.
Stopping and Ejecting Cassettes:
Press the 0 button.
The tape stops playing and the cassette ejects.
NOTE
Remove a cassette from the unit when not listening to it for a
while. If you leave it in the unit too long, the tape may stick to the
tape head and cause unit malfunction.

Fast Forwarding and Rewinding Cassette Tapes

Fast Forwarding Tapes:
Press the FF button.
The tape indicator blinks in the direction of the tape as it is
being fast forwarded.
If the REW button is pressed, normal tape play will begin.
Rewinding Tapes:
Press the REW button.
Tape indicator
The tape indicator blinks in the direction of the tape as it is
being rewound.
If the FF button is pressed, normal tape play will begin.
— 10 —