"FD": Adjust the fader level.
Setting values: Front 15 - Rear 15
ec4/dB (Sound Coordinate)
You can recall the best audio setting preset for different types
of the music.
1
Press the AUD button to enter the Sound Coordinate mode.
2
Press a preset button (#1-5).
The preset settings of the bass and treble tones are recalled.
#1: Flat
#2: Rock
#3: Pops/Top 40
#4: Jazz
#5: Easy
3
Press the AUD button to end the sound coordinate mode.
NOTE
You can call the following settings with this function; bass center
frequency, bass level, bass quality factor, bass extension, treble
center frequency, and treble level setting.
Clock display
Turning clock display On/Off:
Each time you press the CLK button, the display switches
between the clock and each mode display.
Adjusting Time
Adjust the time.
1
When the time is not displayed, first press the CLK button to
display the time.
2
Press the CLK button for at least two seconds to enter the
clock adjustment mode. The time display will blink.
3
• Adjusting the hours
Press the BAND button to advance the hours.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
4
Press the CLK button to end the clock adjustment mode.
— 7 —