Tuner Features; Tuning; Station Preset Memory - Kenwood KRC-108S Instruction Manual

Tuner features

SRC /
BAND /
4 ¢
PWR OFF
CRSC
#1~6
Band display
Frequency
indicator
AUTO indicator
KRC-108S
AUTO / AME
Preset station number
STEREO indicator
— 8 —

Tuning

You can choose between auto seek tuning of receivable
frequencies and manual tuning.
1
Press the SRC (source) button repeatedly to select the tuner
mode."TUuE" is displayed when the tuner mode has been
selected.
2
Press the BAND button to select the band.
Each time you press the BAND button, the band switches
between FM1, FM2, FM3, and AM.
3
Press the AUTO button to switch between auto seek tuning
and manual tuning.
The AUTO indicator lights up only when auto seek tuning is
selected.
4
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
The STEREO indicator lights up when stereo broadcasts are being
received.

Station Preset Memory

Store the frequency of a station. You can then recall that
station with a single touch of a button.
1
Select the band/ station that you want to have stored.
2
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.