Advertisement
Congratulations
You now own a quality portable air cleaner that has been engineered and crafted for your
satisfaction.
Our Consumer Relations representatives will be pleased to help with any questions or
concerns you may have about your air cleaner. Please call our Consumer Relations Dept. at
(800) 332-1110 for assistance or email us at service@honeywell.com.
For Best Performance
We recommend that you operate your air cleaner 24 hours a day because indoor air can
be quickly contaminated by activity in a room, infiltration of outside air and from other
sources of contamination. While all the air in a room will not be processed by the air
cleaner, the more air circulated through the filter, the more filtered air returned to the room.
Portable air cleaners will be much more effective in rooms where all doors and windows
are closed.
Place the air cleaner on a flat, level unobstructed surface. For best performance the air
outlet slot should not be blocked for at least 3 feet (1 meter) in all directions.
NOTE: Due to the large volume of air drawn towards the air cleaner, surrounding areas
should be cleaned and/or vacuumed frequently to prevent buildup. If the unit is placed on a
light colored carpeting, a small mat or rug should be used to ease cleaning and prevent
any permanent staining of carpeting. This is particularly important in homes with heavy
contamination from smoking or fireplaces.
Features
General Description of Features
(See Diagram)
A. Speed Control/Power Switch
B. Filter-Change Calendars
C. HEPA Filter
D. Odor-Lock™ Filter
E. Air Intake
F. Air Outlet
Operation
The Honeywell 16100 Series air cleaner is a three speed
air cleaner operated by moving the speed control knob on
the top panel from the OFF ( ) position to the HIGH (III)
position. Allow the unit to operate for a few minutes at
HIGH speed, then leave the control knob in the HIGH
position for faster, more powerful room cleaning or move
the knob to the lower setting (I) for quieter operation.
F
B
A
E
C
D
Speed levels ( -Off,
III-HIGH, II-MED,
I-LOW) are molded in
on the Speed Control/
Power Switch. The
speed level indicator
is a molded line to the
right of the speed
control dial.
Advertisement
