Shutter Mode - Sony PXW-FS7 Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-FS7:
Table of Contents

Advertisement

Camera
Item
Sub-item setting
Shutter
Mode
Speed / Angle / ECS / Off
Electronic shutter
operating
condition settings
Shutter Speed
1/3 to 1/9000
Shutter Angle
5.625° / 11.25° / 22.5° / 45° /
90° / 120° / 144° / 150° /
172.8° / 180° / 216° / 300°
ECS Frequency
23.99 to 8000 (60)
Color Bars
Setting
On / Off
Color bar settings
Type
ARIB / SMPTE / 75% / 100%
Noise
Setting
Suppression
On / Off
Noise suppression
settings
Level
Low / Mid / High
Flicker Reduce
Mode
Auto / On / Off
Flicker correction
settings
Frequency
50Hz / 60Hz
SteadyShot
Setting
Active SteadyShot /
Image stabilization
SteadyShot / Off
settings
Handle Zoom
Zoom Speed Type
Fix / Variable / Off
Handle zoom
settings
Zoom Speed
1 to 8 (3)
Auto Black
Auto Black Balance
Balance
Execute / Cancel
Auto black
balance settings
Description
Selects the operating mode of the electronic shutter.
Speed/Angle (standard mode):
Used for shooting fast-moving subjects clearly. Selects the
mode for setting the shutter speed in seconds (Speed) or as
a shutter angle (Angle).
ECS (Extended Clear Scan):
Used for shooting without scrolling horizontal bars
appearing in the viewfinder.
Sets the shutter speed when Mode is set to Speed. The
available settings vary depending on the frame frequency of
the selected video format.
Sets the shutter angle when Mode is set to Angle.
Sets the ECS frequency when Mode is set to ECS. The
available settings vary depending on the frame frequency of
the selected video format.
Turns the color bars on/off.
Selects the color bar type.
Turns the noise suppression function on/off.
(Enabled when Base Setting >Shooting Mode in the System
menu is set to Custom)
Sets the noise suppression level.
Sets the flicker correction mode.
Sets the frequency of the power source supplying the lighting
that is causing the flicker.
Turns the image stabilization function on/off.
Note
Enabled when a compatible lens is attached.
Sets the mode of the zoom lever on the handle.
Note
Disabled when the handle is not attached.
Sets the speed of the handle zoom.
(Enabled when Zoom Speed Type is set to Fix)
Note
Disabled when the handle is not attached.
Runs the auto black balance function.
Notes
• The auto black balance function cannot be run if the iris is not
closed. Attach the lens cap and then execute.
• Cannot be run during recording or color bar display.
• Cannot be run when in Interval Rec mode, Frame Rec mode,
Slow & Quick Motion mode, or Slow Shutter mode.
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents