Additional Menu Operations; Downloading The Data To Vcr; Changing The Country Setting - JVC InteriArt LT-26C31BC Service Manual

Additional menu operations

Downloading the data to VCR

You can transmit to the latest Programme numbers (PR)
data to the VCR with the T-V LINK function.
Caution
• Only when the T-V LINK compatible VCR is connected
to the EXT-2 terminal, this operation is enabled.
• Only when the T-V LINK menu is being displayed, this
operation is enabled.
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a button
The data transmission begins.
OWNLOA TV VCR
TRANSFER. . . . .
0037-EN
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu is changed over to
another menu:
The menu operation at the TV side is completed and it is
shifted to the menu operation at the VCR side. Refer to
the VCR Instruction Manual and operate the VCR.
If "FEATURE NOT AVAILABLE" appears at the T-V
LINK menu, ensure the following three items are
correct; then press the a button to retry data
transmission.
• Has the T-V LINK compatible VCR been connected
to the EXT-2 terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is connected to the EXT-
2 terminal to T-V LINK compatible VCR have all
proper connections?

Changing the COUNTRY setting

After the AUTO PROGRAM function is completed, you
can change the country you have already set by using the
AUTO PROGRAM function.
When registering the TV channels for French broadcast
stations (SECAM-L system), perform this operation to
change the country.
1 Display the INSTALL menu
When the EDIT menu is currently being
displayed:
Press the h (Information) to return to the INSTALL
menu.
2 Press the 6 buttons to choose AUTO
PROGRAM. Then press the a button
A COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY as follows:
BACK START
TV OK TV
MORE
D0003-EN
3 Press the 5 and the 6 buttons to choose a
country
4 Press the a button to complete the setting
The menu disappears.
To return to the INSTALL menu from the
COUNTRY menu:
Press the h (Information) button instead of the a button.
BACK START
OK
MORE
31