JVC InteriArt LT-26C31BC Service Manual page 80

INSTALL
DELETE
1 Press the 6 buttons to choose a TV channel
Every time you press the 6 buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR)
appears on the screen.
2 Press the yellow button to delete the TV
channel
The TV channel is deleted from the Programme numbers
(PR) list.
MANUAL
Preparation:
• As long as you register the TV channel (SECAM-L
system) from a French station, be sure to set the
COUNTRY setting to FRANCE. If the COUNTRY
setting is not FRANCE, follow the description
"Changing the COUNTRY setting" on page 31 to
change the COUNTRY setting to FRANCE, then start
the MANUAL function.
1 Press the 6 buttons to choose a Programme
number (PR) to which you want to register a
new TV channel
2 Press the blue button to activate the MANUAL
function
At the right side following the CH/CC number, the
SYSTEM (broadcasting system) of the TV channel
appears.
MANUAL
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
BACK
TV OK
SYSTEM
D0035-EN
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 button to choose the SYSTEM
(broadcasting system) for a TV channel you
want to register
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to "L". If it is set to one other than "L",
you cannot receive the TV channel of the SECAM-L
system.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to "B/G". If "B/G" is not correct, it results
in the fact that you will not hear the sound normally
when the TV detects a TV channel. In this case, retry to
set the SYSTEM again correctly so that no problem
arises.
4 Press the green or red button to search for a TV
channel
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
30
CH / CC
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
( B / G )
CC 01
CC 02
CC 03
SEARCH +
SEARCH-
FINE +
FINE-
5 Press the green or red button repeatedly until
the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and
choose a SYSTEM that has normal sound.
6 Press the a button and register the TV
channel to a Programme number (PR)
The normal EDIT menu is resumed.