[European Union] This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany...
Information for Users on Disposal of Old Contents Equipment and Batteries Features ............2 [European Union] These symbols indicate that the electrical and Contents ............3 electronic equipment and the battery with this Important safety information......4 symbol should not Important Instruction ........5 be disposed of as Location of controls ........7 general household...
Important safety information This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use. • Although this appliance has been carefully manufactured and rigorously checked prior to leaving the factory, as with all electrical appliances it is possible for problems to develop.
Important safety information How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. •...
Page 6
Important safety information WARNING • To prevent fire, never place any type of candle or open flame on the top or near the TV set. Moving the unit or carrying by hand When the unit is moved a long way, unplug the power cord and disconnect the antenna, connecting cables and any fall-prevention apparatus.
Location of controls 9 (LT-32HG22J) Description of Indicators and Controls 1. Remote sensor (Standby/On) indicator: The LED indicator lights up red in standby mode, and blue in the power ON mode. 3. Loudspeakers (Power)-button: Preparation: Connect power-cable to AC220~240V/50Hz. (LT-32HG22J: turn on mains switch (9).) a) If standby-LED is red, you may power-off.
Remote Control Function Page Enter standby mode or turn on the power Display program information Select channel Select Teletext page Enter password Select an input source Select picture format Display the EPG (Electronic Progr. Guide) Turn the sound on/off Activate menu Exit the menu screen Volume Change the TV channel or Teletext page up...
Page 9
Remote Control Install the batteries Use batteries type UM3 (AA-Size). Do not use old or weak batteries. The remote control may not work properly with a weak voltage from such batteries. Replace exhausted batteries with new ones. Never try to recharge normal batteries - this could cause an explosion.
COMPONENT input: See P.25. C.I. slot: for DVB-T-PayTV (if PayTV-provider supports this) HDMI input (LT-26HG22J: HDMI/DVI1, HDMI2 / LT-32HG22J: HDMI/DVI1, HDMI2/3): See P.23. (G) HEADPHONE jack: Plug headphones with a mini plug (3.5 mm) into this jack. PC-INPUT (PC): See P.22.
Note: Auto setup • If you do not wish to carry out the autotuning for Analogue TV-channels, press RETURN to exit the Your television has an Automatic Tuning menu. System which makes tuning in your television easy. This Automatic tuning System scans Auto Installation Channel Scan the entire reception range in your area and...
Selecting the input source When all DVB-T programs have been stored (100%), you will be asked if you want to proceed to autotuning Analogue TV-channels. Press INPUT SELECT to view a signal from If you wish to start the tuning Analogue cable- another device connected to your TV, such as a TV channels.
Note: Auto Synchronization • If the current watching DVB-channel has more than one audio language or subtitle language, This feature can display the time based on the you can change them by each pressing of DVB signal information. AUDIO I/II or If you wish to set the time manually, select •...
Switch on / off Teletext Stereo reception in analogue cable Teletext is not transmitted by all channels. TV channel mode Select a channel that shows teletext. Press . You will now see a teletext page. The following types of broadcast are possible (If “100”...
Remarks on DVB-T system DVB-T is at present still being developed. You can get information regarding the current stage of development from your specialist retailer. As a digital service DVB-T basically works differently to previous analogue TV reception. Reception Possibilities: In contrast to cable TV, DVB-T is received via room or roof antennas.
Password Setup (Parental lock) EPG (Electronic Program Guide) Parental lock is a function of the channel The Guide menu shows the available provider. If it is not supported by the channel, programme listings for the next 8 days only, parental lock is without function. Currently there including today.
Picture size and resolution Resolution and picture quality Broadcast wide screen films in different resolutions. The following table shows the resolution options for wide screen film broadcast media. Broadcast media Resolution of the wide Analogue Digital DVB-T Satellite HDTV Blu-ray- screen signal cable TV cable TV...
Picture format Picture Size Other formats The required picture format can be set by pressing Press PICTURE SIZE until the desired size is reached. the PICTURE SIZE button. Press PICTURE SIZE until the required format is displayed. You move through the following formats when you The picture is displayed in 4:3 press the button: Auto, 4:3, 16:9, 14:9, Cinema, Real format with black bars to the...
Other convenience functions You can change the default settings to convenience use. Setup hint Selected Items Picture Preference Memory Your personal preferences Sport Bright and dynamic picture (factory-set) Standard Standard picture quality (factory-set) Movie Movie-like picture setting (factory-set) Brightness / Contrast / Colour / Tint / Sharpness You can adjust the picture to your preference.
Page 20
Other convenience functions Setup hint Selected Items Country Set the country where you use this product. Audio Language Select preferred audio language, if the current watching DTV channel has more than one audio language. This option is not available for ATV channel. •...
Page 21
Other convenience functions Setup hint Selected Items Subtitle Analog Subtitle If the receiving analogue signal has the Teletext subtitle page, it displays the Teletext subtitle. On / Off Digital Subtitle Language Select preferred subtitle language, if the current watching DTV channel has more than one subtitle language.
PC connection Follow these steps: On your PC monitor choose a resolution of 1360 × 768 at 60Hz and save this configuration. Shut down your PC and connect the shut off LCD TV. Use a screensaver to avoid burning-in of static picture content. Select PC input Use a PC-VGA cable (not supplied) to connect the LCD-Monitor to your PC.
Connecting an HDMI or a DVI device to the HDMI input The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or uncompressed digital video from a DVI equipped device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to use separate analogue leads to transfer the audio signals.
Connection to other equipment 1. Connecting to other equipment Attention: Preparation: • Disconnect all equipment from the AC-supply, to prevent any possible damage. • Make the necessary connections. • Make sure all connections are safe & secure before reconnecting your equipment the AC-supply. Please connect your satellite-receiver or DVD player via SCART (AV1).
Page 25
Connection to other equipment 3. Connecting an audio system You can supply the TV sound to the stereo equipment (A) with the SCART socket. Use a special SCART cable for the connection which sold at the accessory shop. (please consult your hi-fi instructions for details).
The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. Specifications LT-26HG22J LT-32HG22J System Analogue:...