Install; Language; Auto Program - JVC InteriArt LT-26C31BC Service Manual

INSTALL

Refer to "Using the TV's menu" (see page 17) for details of
displaying the menu.
INSTALL

LANGUAGE

AUTO PROGRAM

EDIT / MANUAL
BACK
TV OK
D0029-EN
LANGUAGE
You can choose the language you want to use for the on-
screen display from the language list in a menu.
1 Choose LANGUAGE, then press the a button
A sub-menu of the LANGUAGE function appears.
LANGUAGE
BACK
TV OK
D0002(E)-EN
2 Press the 5 and 6 buttons to choose a
language. Then press the a button
AUTO PROGRAM
You can automatically register the TV channels which can
be received well at your residence in the TV's Programme
numbers (PR) by performing the following.
1 Choose AUTO PROGRAM. Then press the a
button
The COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY menu as follows:
BACK
START
TV OK TV
MORE
D0003-EN
2 Press the 5 and 6 buttons to choose the
country where you are now located
3 Press the blue button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
• To cancel the AUTO PROGRAM function, press the
b button.
AUTO PROGRAM
EDIT
PR
CH 10
AV
01
02
20%
03
04
05
BACK
06
TV OK 07
08
09
BACK
TV
D0004-EN
After the TV channels have been registered in
the Programme numbers (PR), the EDIT menu
appears.
BACK
START
OK
MORE
ID CH / CC
BBC1 CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CC 01
CC 02
CC 03
ID
INSERT
OK
MOVE
DELETE
MANUAL
• You can proceed to edit the Programme numbers
(PR) using the EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 28.
• If you do not need to use the EDIT/MANUAL
function, go to the next step.
4 Press the a button to display the T-V LINK
menu
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
5 If you do not have a T-V LINK compatible VCR
connected:
Press the b button to exit the T-V LINK menu.
If you have a T-V LINK compatible VCR
connected to the EXT-2 terminal:
Follow the operating procedure "Downloading the data
to VCR" on page 31 to transmit the Programme number
(PR) data.
• When your TV can detect the TV channel name from
the TV channel broadcast signal, it automatically
registers the TV channel name (ID) to the Programme
number (PR) in which the TV channel has been
registered.
• If a TV channel you want to view is not set to a
Programme number (PR), manually set it using the
MANUAL function. For details, see "EDIT/
MANUAL" on page 28.
• The TV channel is not registered in Programme
number PR 0 (AV). When you want to register a TV
channel to PR 0 (AV) manually set it using the
MANUAL function. For details, see "EDIT/
MANUAL" on page 28.
27