Kenwood TK-760G Service Manual page 48

TK-760G/ ( N
Adjustment Location
Switch (TK-760G)
LED
Volume
Power up/down
MIC jack Programmable function keys
Note
• Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-67D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
• EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
48
) /762G/ ( N )
ADJUSTMENT
Channel
Display up/down
Adjustment Point
TX-RX UNIT (A/2)
L18
L15 TC106
PLL/VCO
L13
CV
L5
TC109
L11
Repair Jig
• Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-
760G/762G. The jig facilitates the voltage check when the
voltage on the component side TX-RX unit is checked during
repairs.
• Extension cable
Part No. : E30-3404-05
Extension cable
RSSI
Bx2
Ax4
Ax5
Ax2
A ø2.6 x 6
B M3 x 8