Wan Connection - D-Link DIR-825 Quick Installation Manual

DIR-825
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating a 3G WAN connection, proceed to the USB
modem menu and enter the PIN code on the page displayed
1. Go to the Net / WAN page and click the Add button.
2. In the General settings section, from the Provider drop-down list,
select your country and operator to automatically specify all settings
required to connect to the Internet. To specify all settings independently,
leave the Manually value.
3. From the Connection Type drop-down list, select the 3G value.
4. Make sure that the USB value is selected from the Interface drop-down
list.
5. Specify a name for your connection (any name for easier identification) in
the Name field.
5 For GSM USB modems only. For CDMA USB modems, it is required to disable the
PIN code check on the identification card prior to connecting the USB modem to the
router.
Quick Installation Guide
5 .
20