D-Link DIR-825 Quick Installation Manual page 23

DIR-825
7. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router
at the moment) as the MAC address of the WAN interface, click the
Clone MAC Address button (
connected to the router's LAN at the moment, select the relevant value
from the drop-down list (the field will be filled in automatically).
8. For connection of PPPoE type: in the PPP section, enter authorization
data provided by your ISP (the username (login) in the Username field
and the password in the Password and Password confirmation
fields), or select the Without authorization checkbox if authorization
is not required.
Quick Installation Guide
). To set the address of a device
23