Table of Contents
Advertisement
4069-5XX/7XX
User Message
Primary
36 Resolution
Reduced
37 Insufficient
Collation Memory
38 Memory Full
39 Complex Page
51 Defective Flash
52 Flash Full
53 Unformatted
Flash
2-34
Service Manual
User
Message
Explanation
Secondary
The resolution of the page has been
reduced from 600 dpi to 300 dpi to
prevent a Memory Full error. This
message can only occur if the
Resolution Reduction setting is turned
on.
Note: 1200 dpi pages are not resolution
reduced. If a 1200 dpi job runs out of
memory, a Memory Full error is
displayed.
This message is displayed when the
printer memory used to store pages is
too full to collate the print job.
This message is displayed when the
printer memory used to store pages is
full.
This message is displayed when the
page is too complex to print.
This message is displayed when the
printer detects a defective flash. This
error may occur at power on, or during
flash format and write operations. Press
Go to clear the message. The flash is
marked as bad and normal operation
continues. Flash operations are not
allowed until the problem is resolved.
This message is displayed when there is
not enough free space in the flash
memory to hold the resources that have
been requested to be written to flash.
This message is displayed when the
printer detects an unformatted flash at
power on. Press Go to clear the
message. The flash is marked as bad
and normal operation continues. Flash
operations are not allowed until the flash
is formatted.
Advertisement
Table of Contents
