Lexmark T62X Service Manual page 36

4069-5XX/7XX
Error Code
990 Service
<device>
991 Service
<device> Card
Sub Error Codes for 9XX and 2XX Error Codes
The sub error codes are helpful troubleshooting a paper path
problem, especially paper jams in the base printer, envelope feeder
and duplex unit.
When a 9XX or 2XX error displays:
1. Press and hold Return and press Select to enter for sub error
codes.
2. The first screen of information is displayed. Write down the
information.
2-8
Service Manual
Action
This error will be displayed when an equipment check
condition has occurred in the specified device
(<device>), but the device is unable to identify the exact
component failure.
Specified device <device> can be one of the following:
*System Board
* Duplex
*Tray x (x = 1,2,3,4 or 5)
*Envelope Feeder
*Output Bin x (x = 1,2,3 to 6)
**Will be displayed for single bin output options.
*Output Bins x to y (x to y = 1 to 5, 2 to 6, 6 to 10)
**Will be displayed for multiple bin output options.
*StapleSmart Finisher Option
This message will be displayed when the specified
device has detected an equipment check in its system
card.
Specified device <device> can be one of the following:
* Duplex
*Tray x (x = 1,2,3,4 or 5)
*Envelope Feeder
*Output Bin x (x = 1,2,3 to 6)
**Will be displayed for single bin output options.
*Output Bins x to y (x to y = 1 to 5, 2 to 6, 6 to 10)
**Will be displayed for multiple bin output options.
*StapleSmart Finisher Option