Sony PS-LX300USB Service Manual page 2

SERVICE MANUAL
Ver. 1.2 2008.09
• IBM and PC/AT are registered trademarks of
International Business Machines Corporation.
• Microsoft, Windows and Windows Vista are
either registered trademarks or trademarks of
Microsoft Corporation in the United States and
/ or other countries.
• Sound Forge is a trademark or registered trade-
mark of Sony Creative Software Inc. in the
United States and other countries.
• All other names of systems and products are
trademarks or registered trademarks of their re-
spective owners. TM and ® marks are omitted in
this manual.
Sony Corporation
9-887-948-03
2008I05-1 Audio&Video Business Gourp
© 2008.09 Published by Sony Techno Create Corporation
PS-LX300USB
Motor and Platter
Drive system:
Belt-drive
Motor:
DC motor
Platter:
295 mm dia. (aluminum die-cast)
Speeds:
33 1 / and 45 r/min, 2 speed
3
Wow and flutter:
Less than 0.25% (WRMS)
Signal to noise ratio:
More than 50 dB (DIN-B)
Tone Arm
Type:
Dynamic balanced straight-shaped with
soft damping control
Effective arm length:
195 mm
USB jack
Power supply:
USB bus power compliant (5 V, 100 mA)
(The power is supplied by the PC which is
connected with an attached USB cable)
Output jack:
Plug-in-power system (Dedicated USB
jack)
USB series B connector
USB (full-speed)
Canadian Model
Australian Model
SPECIFICATIONS
General
Power requirements:
North American model:
120 V AC, 60 Hz
Other models:
230 – 240 V AC, 50/60 Hz
Power consumption:
2 W
Dimensions:
Approx. 420 × 95 × 360 mm (16
1
14 / in) (w/h/d)
4
Mass:
3.3 kg (7 lb 5 oz)
Supplied Accessories:
45 r/min adaptor (1)
Platter (with drive belt) (1)
Rubber mat (1)
USB cable (1)
CD-ROM (1)
Operating Instructions
The installation guide for "Sound Forge
Audio Studio LE"
Design and specifications are subject to change
without notice.
STEREO TURNTABLE SYSTEM
US Model
AEP Model
UK Model
1 / × 3 5 / ×
2 8