Advertisement
_____________________________________________________________________________
NOTE: Use a level while you are installing the pipe or Portable Mount to
ensure that it is as straight as possible in the vertical plane.
Drive the 1-1/4" (1-5/8" OD MAX) x 40-inch long pipe into the ground leaving
15 INCHES MAXIMUM above the ground. If you have purchased the
optional S9v Pipe Mount Clamp, bolt it to the pipe an inch or two above the
ground.
If you are using the optional Portable Mount, drive the stake into the ground
until the bottom of the mount is flush with the ground.
3. Install the Radial Plate. After you have installed the pipe or Portable Mount,
install the radial plate. (The S9 Radial Plate simply slips over the pipe or
Portable Mount.)
________________________________________________________________________
S9v 31' Installation Guide
15 inches
maximum from
ground to top of
pipe
10
Advertisement
