System Q; Speaker & Woofer Setting - Kenwood KDC-8090R Instruction Manual

NOTE
• Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 37)
• The same items cannot be selected for both the upper part and
the lower part.

System Q

You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Scan of Flat – Easy
(Default setting)
User memory*
Flat
Rock
NOTE
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, treble level non-fading level, high-
pass filter frequency for front output, high-pass filter frequency
for rear output, and low-pass filter frequency for non-fading
output.
Note that some of these parameters cannot be controlled by the
audio control setting feature. (KDC-8090R)
Their setting values are different depending on the setting of the
speaker and woofer setting mode.
Easy
Jazz
Pops
*User memory:
The unit returns to the state
Top 40
adjusted the last time with
the audio control setting feature.
Speaker & Woofer setting
Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to
the type of subwoofers.
1
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2
Press the Q button to enter the speaker setting mode.
3
Each time you press the FM/AM button, the mode switches as
follows:
Speaker setting mode
Woofer setting mode (KDC-PS9590R/9090R only)
4
•In speaker setting mode
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("Speaker Setting OFF") /
For 6/6x9 in. speaker ("Speaker Setting 6
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /
For the OEM speaker ("Speaker Setting O.E.M.")
• In woofer setting mode
Press either the 4 or ¢ button to select the type of Sub
woofer. The setting switches as follows.
"Woofer OFF" / "12in type A" / "10in type A" / "12in type B" /
"10in type B" / "12in type C" / "10in type C" / "8inch" / "12in
type D" / "10in type D"
5
Press the Q button to end the speaker setting mode and
woofer setting mode.
NOTE
• Speaker setting function allows for tuning of bass, middle and
treble.
• Woofer setting allows for tuing of high-pass filter frequency,
low-pass filter frequency and non-fading level.
— 13 —
9/6 inch") /
*