Focusing The Camera; Obtaining Optimum Focus And Exposure - HP Photosmart M22 User Manual

Focusing the Camera

The focus brackets in the Live View screen show the focus
region for the still picture you are taking or the video clip you
are recording. (See Using Live View on page 31.) When you
press the Shutter button halfway down to take a still picture,
the camera automatically measures and locks the focus and
exposure in the focus region. The focus brackets in the Live
View screen turn green when the camera has found and
locked the focus and exposure. This is called auto focus.
Obtaining Optimum Focus and
Exposure
When you have the camera set to any of the shooting modes
other than Macro
page 42), the camera will attempt to auto focus. However,
when the camera cannot focus in these shooting modes, the
focus brackets in Live View turn red. This indicates that the
picture may be out of focus either because the camera had
difficulty focusing on the subject or because the focus range
is too close. The camera will still take the picture, but you
should release the Shutter button, then try re-framing the
subject of your picture and pressing the Shutter button
halfway down. If the focus brackets are still red, release the
Shutter button.
• If the camera had difficulty focusing on the subject
because of low contrast, try using focus lock (see Using
Focus Lock on page 38).
• If the subject is too close (less than 50 cm or 20 in), either
move farther away from the subject you are trying to
photograph, or set the camera to the Macro
mode (see Using the Shooting Modes on page 42).
Downloaded From camera-usermanual.com HP Manuals
HP Photosmart M22/M23 User's Manual
36
(see Using the Shooting Modes on
shooting