6. When transporting machine: Unplug power cord from wall outlet. Get assistance when lifting machine. Do not wheel up or down stairs. Use tie- -down straps to secure machine to truck or trailer. Tennant E5 (03- -08) Home Find... Go To..
WARNING: Fire or WARNING: Electrical Haz- Explosion Hazard. ard. Do not use with damaged Do not use flammable li- cord. Unplug cord before servi- quids. Do not pick flam- cing. mable liquids Tennant E5 (03- -08) Home Find... Go To..
11. Recovery Window 24. Vacuum Shoe 12. Tank Cover 25. Brush Base 13. Main Wheels 26. Brush Idler Plate Locking Knob SWITCH SYMBOLS Power On Brush Vacuum Power Off Solution Accessory Tool Tennant E5 (03- -08) Home Find... Go To..
(Figure 3). FIG. 6 FIG. 3 NOTE: If storing the machine for an extended period, remove the brush to prevent a flat spot. Tennant E5 (03- -08) Home Find... Go To..
Use or Pick Up Flammable Materials. 1. Pull the handle adjustment lever and adjust the handle to a comfortable operating height (Figure 11). Release the lever to lock the position. FIG. 9 FIG. 11 Tennant E5 (03- -08) Home Find... Go To..
Page 8
FIG. 15 FOR SAFETY: Before removing obstruction from brush unplug power cord from wall outlet. FOR SAFETY: When operating machine, do not run machine over power cord. Tennant E5 (03- -08) Home Find... Go To..
If the power cord is damaged or broken, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. FIG. 20 FIG. 21 Tennant E5 (03- -08) Home Find... Go To..
Page 10
FIG. 26 FIG. 27 4. Clean the solution hose screen (Figure 28). FIG. 31 7. Clean the machine with an all purpose cleaner and damp cloth (Figure 32). FIG. 28 FIG. 32 Tennant E5 (03- -07) Home Find... Go To..
Stock Items are clearly identified with a bullet preceding the parts description. See example below: FIG. 33 BRUSH MOTOR MAINTENANCE Contact an Authorized Service Center for carbon brush replacement. Carbon Brush Replacement Hours Brush Motor Tennant E5 (03- -08) Home Find... Go To..
TOTAL POWER CONSUMPTION 5.4 A POWER CORD LENGTH 15 m DECIBEL RATING AT OPERATOR’S EAR, INDOORS 69 dBA PROTECTION GRADE IPX3 VIBRATIONS AT CONTROLS <2.0 m/s MACHINE DIMENSIONS 680 mm 709 mm 490 mm Tennant E5 (03- -08) Home Find... Go To..
Need help?
Do you have a question about the E5 and is the answer not in the manual?
Questions and answers