Tennant EH1 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. Tennant Manuals
  4. Floor Machine
  5. EH1
  6. Operator and parts manual
Tennant EH1 Operator And Parts Manual

Tennant EH1 Operator And Parts Manual

100 psi carpet extractor with heat
Hide thumbs Also See for EH1:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EH1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tennant EH1

Summary of Contents for Tennant EH1

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
  • Page 2 100 PSI Carpet Extractor with Heat Extractor de alfombras con calor de 100 PSI Spanish French Extracteur de moquette de 100 psi avec réchauffeur Operator and Parts Manual EN Manual para el operador y de repuestos Spanish ES Manuel de l’opérateur et des pièces détachées French FR Model Part No.: 1072864 - 120V...

  • Page 3: Table Of Contents

    It is designed to clean carpets out the attached MACHINE INSTALLATION/WARRANTY in an indoor environment and is not constructed for any REPORT REPLY CARD and return to Tennant within 30 other use. Use only commercially available floor cleaners days of purchase. and recommended accessory tools intended for machine application.

  • Page 4: Important Safety Instructions

    34. Get assistance when lifting machine. 35. All repairs must be performed by a qualified service person. Use only manufacturer-supplied or equivalent replacement parts. 36. Do not expose machine to rain or moisture. Store indoors only. Do not expose machine to freezing temperatures. 37. Wear appropriate personal protection equipment as needed. SAVE THESE INSTRUCTIONS Tennant EH1 (01/2014)

  • Page 5: Safety Label

    If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This machine is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated below. Make sure that the machine is connected to an outlet having the same configuration as the plug. Tennant EH1 (01/2014)

  • Page 6: Machine Components

    Solution Hose and Vacuum Hose 40 ft. Power Cord CONTROL PANEL COMPONENTS FRONT VIEW Recovery Tank Vacuum Hose Connection Drain Hose Heater Circuit Switch Breaker Vacuum Pump Switch Switch Solution Tank Fill Location Solution Hose Connection Swivel Caster Tennant EH1 (01/2014)

  • Page 7: Machine Setup

    With switches turned off connect the solution hose and the vacuum hose to the machine and to the wand. Only use Close and tighten the recovery tank cover and screw the cap accessory tools supplied with machine or offered by Tennant. onto the drain hose. The use of improper accessory tools may cause injury.

  • Page 8: Machine Operation

    Monitor the water level in the solution tank. If solution tank runs dry, the pump must be reprimed. When the solution tank is low, turn off all the switches, empty the recovery tank and then fill the solution tank. Tennant EH1 (01/2014)

  • Page 9: Draining Tanks

    Re-attach wand and hose to machine. Pour solution into solution tank and run solution through system by turning on pump and activating wand. Do not recycle solution as it will carry small mineral deposits. After running solution through system flush with clean water and reinstall spray tips. Tennant EH1 (01/2014)

  • Page 10: Servicing Machine

    Store extractor with tank covers off to promote air circula- tion. Store machine in dry area. WARNING: Do not expose to rain. Store indoors only. ATTENTION: If storing machine in freezing tempera- tures be sure that machine solution system and pump are completely drained and dry. Tennant EH1 (01/2014)

  • Page 11: Machine Specifications

    12/3, 40ft/ 12 m Sound Pressure Level* 70 dBA Sound levels (ISO 11203) as recommended by the American Association of Cleaning Equipment Manufacturers *(AACEM) and OSHA. Specifications are subject to change without notice. MACHINE DIMENSIONS 32.5 inches 25.25 inches 826 mm 641 mm Tennant EH1 (01/2014)

  • Page 12: Troubleshooting

    Shorten spray times by shortening cleaning strokes No heat Circuit Breaker tripped Reset circuit breaker on control panel Faulty heater Contact a qualified service technician No power No power to machine Check building circuit breakers, make sure plugs are on 2 different outlet circuits Tennant EH1 (01/2014)
  • Page 13 N.º de serie: ___________________________________ USO PREVISTO Fecha de instalación: ____________________________ El extractor Tennant está diseñado para uso comercial, por ejemplo, en hoteles, escuelas, hospitales, comercios, oficinas y IMPORTANTE: A fin de asegurarse la protección con empresas de alquiler. Está diseñado para la limpieza de alfombras garantía completa, complete la FICHA DE RESPUESTA AL...

  • Page 14: Instrucciones Importantes De Seguridad

    32. No utilice la máquina si no se encuentra en las condiciones apropiadas para su uso. 33. No modifique el diseño original de la máquina. 34. Pida ayuda para levantar la máquina. 35. Una persona de servicio calificada debe realizar todas las reparaciones. Use únicamente las piezas de repuesto provistas por el fabricante o equivalentes. 36. No exponga la máquina a la lluvia o a la humedad. Guárdela en un lugar cerrado. No la exponga a temperaturas muy bajas. 37. Utilice equipos de protección personal según sea necesario. CONSERVE ESTAS INSTRUCCIONES Tennant EH1 (01/2014)

  • Page 15: Etiqueta De Seguridad

    120 voltios nominales y cuenta con un enchufe de conexión a tierra similar al de la siguiente ilustración. Asegúrese de conectar la máquina a un toma corriente con la misma configuración del enchufe. Toma corriente de 3 orificios con conexión a tierra de 20 AMP Perno de conexión a tierra Tennant EH1 (01/2014)

  • Page 16: Componentes De La Máquina

    Manguera de manguera de drenaje del tanque aspiración de recuperación Interruptor del Interruptor de calentador seguridad Interruptor de aspiración Interruptor de la bomba Ubicación del llenado del tanque con solución Conexión de la manguera de solución Rueda giratoria Tennant EH1 (01/2014)

  • Page 17: Instalación De La Máquina

    Use solamente los accesorios provistos con la máquina o Asegúrese de que las espreas en el mango estén ajustadas y de aprobados por Tennant. El uso de accesorios inadecuados puede que la pantalla del flotador de bola en el tanque de recuperación causar lesiones. esté limpia y en funcionamiento.

  • Page 18: Operación De La Máquina

    PRECAUCIÓN: Cuando tome el mango, evite el contacto con el conector de la manguera, la válvula y la línea de solución metálica. Esta área podría implicar un riesgo de quemaduras. Use guantes protectores cuando sea necesario. Tennant EH1 (01/2014)

  • Page 19: Tanques De Drenaje

    Utilice equipos de protección personal según sea necesario. DESPUÉS DE CADA USO Si se utilizan productos químicos en el tanque de solución, enjuague el sistema con agua limpia mediante el funcionamiento de la máquina con agua limpia al final de cada trabajo. Drene y enjuague el tanque de recuperación. Quite las pelusas de la pantalla del flotador de bola en el tanque de recuperación y los residuos del filtro de entrada del tanque de solución. Asegúrese de volver a colocar la pantalla del flotador de bola y el filtro de entrada del tanque de solución con seguridad. Tennant EH1 (01/2014)

  • Page 20: Asistencia Técnica De La Máquina

    ADVERTENCIA: No la exponga a la lluvia. Guárdela en un lugar cerrado. ATENCIÓN: Si guarda la máquina en ambientes con temperaturas muy bajas, asegúrese de que el sistema de solución de la máquina y la bomba se hayan drenado completamente y estén secos. Tennant EH1 (01/2014)

This manual is also suitable for:

1072864

Table of Contents