Table of Contents
Advertisement
Adjusting settings via the operating menu
Setting the mode for the MUTE switch – "Mute Mode"
Advanced Menu
Mute Mode
AF On/Off
Call up
"Mute Mode"
Mode
"AF
On/Off"
"RF
On/Off"
"Disabled"
For information on how to use the
Emulating guitar cables – "Cable Emulation"
Advanced Menu
Cable Emulation
Medium
Call up
"Cable Emulation"
Via the
"Cable
Emulation" menu item, you can emulate different guitar
cable capacities in order to influence the sound of your guitar.
Activating/deactivating the pilot tone transmission – "Pilot Tone"
Advanced Menu
Name
Pilot Tone
A c t i v e
Call up
"Pilot Tone"
The bodypack transmitter adds an inaudible pilot tone to the audio signal.
The receiver detects and evaluates the pilot tone, and is thus able to
identify the signal of the matching transmitter and mute all others. The
pilot tone supports the receiver's squelch function.
Devices of the ew 100 G1 series (generation 1) do not support the pilot
tone function. Therefore, please observe the following when combining a
bodypack transmitter or receiver of the ew 100 G3 series (generation 3)
with devices from an earlier evolution wireless generation:
Transmitter
w G3/ w G2
w G3
w G1
Adjusting the contrast of the display panel – "LCD Contrast"
You can adjust the contrast of the display panel in 16 steps.
20
SET
Mute Mode
AF On/Off
Select the desired
setting
"Stored"
Function
When the switch is in the
no audio signal is transmitted.
When the switch is in the
the RF signal is deactivated.
The muting function is deactivated.
MUTE
SET
Cable Emulation
Medium
Select the
desired setting
"Stored"
SET
P i l o t
A c t i v e
Select the
desired setting
"Stored"
Receiver
w G3/ w G2
w G1
w G3
Mute Mode
Store the setting
MUTE
MUTE
switch, refer to page 12.
Cable Emulation
Store the setting
P i l o t
I n a c t i v e
Store the setting
Make sure to ...
... activate the pilot tone
function on both bodypack
transmitter and receiver.
... deactivate the pilot tone
function on the ew 100 G3
bodypack transmitter.
... deactivate the pilot tone
function on the ew 100 G3
receiver.
RF On/Off
SET
position,
position,
High
SET
SET
Advertisement
Table of Contents
