Sonos Bundle 150 Setup Manual page 32

24 Sonos Bundle 150 Setup Guide
Controller. Please go to our Web site at
http://faq.sonos.com/firewallfor
additional
information. If this does not resolve the problem, you can try step 2 below.
2. Check the router
You can bypass your router's switch to determine whether there are any router
configuration issues by connecting Sonos as follows (note that the ZonePlayer and the
computer still have Internet access in this configuration):
Computer
ZonePlayer 90
Cabie/DSL
modem
~a
e)
• Be sure that your cable/DSL modem is connected to the router's WAN (Internet)
port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the
ZonePlayer (or ZoneBridge if you purchased one separately), and then connect
another Ethernet cable from the ZonePlayer directly to one of the LAN ports on
your router.
• When you make a change to your network configuration, you may need to
power cycle the ZonePlayer by unplugging the power cord, and then plugging
it back in.
• If you are not using a router, visit our Web site at
http://faq.sonos.com/norouterformore
information.