Using Line-In - Sonos Bundle 150 Setup Manual

Sonos Bundle 1SO Setup Guide
17
Controlling the volume from your home theater or amplifier
To control the volume exclusively from your home theater or amplifier, you can change
the line-out level on this ZonePlayer to
Fixed
by selecting one of the following options:
• Using the Sonos Controller,
from the
Music
menu, select
System Settings.
Select
ZonePlayer Settings,
and use the scroll wheel to highlight the ZonePlayer
attached to the receiver. Select
Line-Out Level,
and choose
Fixed.
• Using the Desktop Controller software,
select
ZonePlayer Settings
from the
Zones
menu. Select the ZonePlayer attached to the receiver, and then click
Settings.
Click the
Line-Out
tab, and choose
Fixed.
Note:
When you change the line-out level to
Fixed
on your ZonePlayer,
you will not be able to adjust the volume or the equalization settings using
your Sonos Controller.
Using Line-In
You can connect an external source such as a CD player, portable music player, or
television to your Sonos Multi-room Music System. The device will be automatically
detected as soon as you plug it in.
1. Use a standard RCA cable to plug an external source like a CD player into the
analog
Audio In
connections on the back of your ZonePlayer.
• If you are connecting a portable player to the ZonePlayer, you will need a
1/8
inch mini-stereo to RCA audio cable instead. Plug the mini-stereo end into the
portable device and the RCA end into the Audio In connection on the
ZonePlayer.
2. Choose one of the following options:
• Using the Sonos Controller,
select
Line-In Sources
from the
Music
menu. Select
Edit Name
to select a source name for this device. Once setup is complete,
simply select
Line-In Sources
from the
Music
menu, and touch
Play
any time
you want to play music from this device.
• Using the Desktop Controller software,
select the
Line-In
tab from the
Music
Library.
Select
Setup----»Line-In
to select a source name for this device. Once