Adjustment Of Equalizer Type At Pro; Memory Preset Of Adjustment Of Equalizer Type - Kenwood DPX-MP4070 Instruction Manual
Double din sized cd/cassette receiver
Hide thumbs
Also See for DPX-MP4070:
- Instruction manual (108 pages) ,
- Instruction manual (45 pages) ,
- Service manual (42 pages)
Table of Contents
Advertisement
Adjustment of Equalizer type at PRO
"PRO".
1
2
Select the item for adjustment
Each time the button is pressed, the items that
3
Adjust the item
Adjustment Item
Adjustment Item
Display
Display
Display
Bass Center Frequency
Bass Center Frequency
"BasF"
Bass level
"BasLV"
Bass Q Factor
"BasQ"
Bass Extend
"EXT"
Middle Center Frequency "MidF"
Middle Center Frequency
Middle level
"MidLV"
Middle Q Factor
"MidQ"
Treble Center Frequency
Treble Center Frequency
"TreF"
Treble level
"TreLV"
• According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor
Bass Center Frequency
Bass Center Frequency
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
• When the Bass Extend is set to ON, low frequency
response is extended by 20%.
4
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
Memory preset of adjustment of
Equalizer type
The 'Adjustment of Equalizer type at PRO' can be
preset.
1
2
Recalling a setting value
1
Range
Range
60/70/80/100 or 150 Hz
-12 - +12
1.00/1.25/1.50/2.00
ON/OFF
2
0.5/1.0/1.5/2.0 kHz
-12 - +12
1.0/2.0
10.0/12.5/15.0/17.5 kHz
-12 - +12
Refer to 'Adjustment of Equalizer type at
PRO' (page 13) to adjust the Equalizer type.
Preset the adjusted value
second.
Enter the Equalizer Control mode
"EQ PRO" is displayed.
• If "EQ EASY" is displayed, refer to 'Equalizer mode'
(page 25) to set the mode to "EQ PRO".
Recall the setting value
13
|
Hide quick links:
Advertisement
Chapters
Table of Contents
