Kenwood DPX-MP4070 Instruction Manual page 35

Installation type 2
1
Attach Accessory9 which was assembled in
Assembly.
Accessory9 is to be fixed either to the center or bottom,
depending on the car model.
Accessory3 3
(M5 × 7 mm) (M5 × 7 mm)
2
Remove the factory-installed car stereo and
install the unit.
Factory-installed
car stereo
Accessory!
(M5 × 10 mm)
Installation type 3
1
Accessory0
(M3 × 6 mm)
Accessory9
Accessory Accessory0
(M3 × 6 mm)
2
Attach Accessory@ to Accessory9 which was
assembled in Assembly.
Accessory3 3 Accessory
(M5 × 7 mm) (M5 × 7 mm)
Accessory Accessory@
Remove the factory-installed car stereo and
install the unit.
Factory-installed
car stereo
Accessory9
Accessory Accessory!
(M5 × 10 mm)
Reuse the screws
that were removed..
35
|
English