1. Manuals
  2. Brands
  3. EVOC Manuals
  4. Motherboard
  5. EC7-1817LNAR
  6. User manual

EVOC EC7-1817LNAR User Manual

Mini-itx motherboard based on chief river platform (ivy bridge cpu+qm67 pch)
Hide thumbs Also See for EC7-1817LNAR:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
EC7-1817LNAR
基于 Chief rive 平台 （IVY bridge CPU+QM67
PCH）的 MINI-ITX 主板
MINI-ITX motherboard based on Chief
River platform (IVY Bridge CPU+QM67
PCH)
Version: C02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC7-1817LNAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EVOC EC7-1817LNAR

Summary of Contents for EVOC EC7-1817LNAR

  • Page 1 EC7-1817LNAR 基于 Chief rive 平台 （IVY bridge CPU+QM67 PCH）的 MINI-ITX 主板 MINI-ITX motherboard based on Chief River platform (IVY Bridge CPU+QM67 PCH) Version: C02...

  • Page 2: Copyright Notice

    Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies.

  • Page 3: Safety Instructions

    Safety Instructions Please read this manual carefully before using the product; Leave the board or card in the antistatic bag until you are ready to use it; Touch a grounded metal object (e.g. for 10 seconds) before removing the board or card from the anti-static bag;...

  • Page 4: Table Of Contents

    Contents Chapter 1 Product Introduction..................1 Overview ......................1 Mechanical Dimensions, Weight and Environment ..........1 Typical Consumption ....................1 Microprocessor .....................2 Chipset ........................2 System Memory....................2 Display Function....................2 Network Function ....................3 Audio Function .....................3 Power Feature .......................3 Expansion Bus ......................4 Watchdog Function ....................4 Operating System....................4 On-board I/O......................4 Chapter 2 Installation....................5 Product Outline.....................5...
  • Page 5 Status Indicating and Control Connector ............14 Power Connector ....................15 SATA Connector ....................15 Hot-swap of SATA Hard Disk................15 LAN Port ......................17 Switch .........................18 GPIO Connector ....................18 Fan Connector.....................18 TPM Pin Header ....................19 Mini PCIe Connector ..................20 PCIe x4 Slot......................21 Install the CPU....................21 Install the CPU Fan.....................22 Chapter 3 BIOS Setup ....................23 UEFI Overview....................23...

  • Page 6: Chapter 1 Product Introduction

    Operating Environment: Temperature: 0C ~ 60C; Humidity: 5% ~ 95% (non-condensing);  Storage Environment: Temperature: -40C ~ 80C; Humidity: 5% ~ 95% (non-condensing); Typical Consumption The typical consumption is based on the following idle status values. EC7-1817LNAR - 1 -...

  • Page 7: Microprocessor

    Adopts Intel® IVY bridge CPU built-in integrated graphics controller display chip, supporting Direct X11.0; also supports Sandy bridge CPU built-in graphics processing, supporting DirectX 10.1;  Supports VGA+LVDS, VGA+Display Port, VGA+HDMI and VGA+DVI display and hot-swap function, all of which are synchronous output; - 2 - EC7-1817LNAR...

  • Page 8: Network Function

    Press the POWER BUTTON to power off the computer after save the setting. Measure VCC5SB via ammeter, at that time the power on VCC3SB has been disabled while the power on VCC3_3DSW remains. That is to say the system has entered DSW status. EC7-1817LNAR - 3 -...

  • Page 9: Expansion Bus

    XP), USB floppy driver is required to load and install the AHCI driver before installing the operating system. Tips: how to identify the alarms 1. One short beep indicates that a system memory error occurs.; 2. Short beep indicates to power on the computer. - 4 - EC7-1817LNAR...

  • Page 10: Chapter 2 Installation

    Warning! Please adopt appropriate screws and proper installation methods (including board allocation, CPU and heat sink installation, etc); otherwise, the board may be damaged. It is recommended to use M3x6 GB9074.4-88 screws at H1 ~ H4. EC7-1817LNAR - 5 -...

  • Page 11: Locations Of Connectors

    Chapter 2 Installation Locations of Connectors HDMI1 PWR1 AUDIO1 GPIO1 PCIE1 COM2 COM1 JLCD1 LCDB1 LVDS2 LVDS1 JCC1 MPCIE1 CPUFAN1 DIMM1 DIMM2 SYSFAN1 PWR5 PWR4 PWR3 PWR2 - 6 - EC7-1817LNAR...

  • Page 12: Structure

    Tip: How to identify the first pin of the jumpers and connectors Observe the letter beside the socket; it would be marked with “1” or bold lines or triangular symbols; Observe the solder pad on the back; the square pad usually denotes the first pin. EC7-1817LNAR - 7 -...

  • Page 13: Jumper Setting

    AMT driver; therefore, before installing the ME driver, please set the jumper cap of JP2 to “OFF” so as to enable ME. - 8 - EC7-1817LNAR...

  • Page 14: Install The System Memory

     It is recommended to use the memory bank with SPD to ensure stable operation. Serial Port The board provides two 2x5Pin serial ports (Pitch: 2.54mm), supporting RS-232 mode; the pin definitions are as follows: Signal Name DCD# DTR# DSR# RTS# COM1/COM2 CTS# EC7-1817LNAR - 9 -...

  • Page 15: Lcd Backlight Control Connector

    The board provides twelve USB ports, six of which are standard ports while the other six ports are brought out on three 2x5Pin headers (Pitch: 2.54mm). Signal Name USB_Data- J5(USB1/USB2) USB_Data+ J2(USB3/USB4) J3(USB9/USB10) Signal Name Signal Name USB1_Data- USB2_Data- USB1_Data+ USB2_Data+ J6(USB5/USB6) J7(USB7/USB8) J8(USB11/USB12) - 10 - EC7-1817LNAR...

  • Page 16: Display Connector

    LVDS2; Pitch: 1.0mm). When single channel 18-bit/24-bit LVDS screens are adopted, the LVDS data cable shall be connected with LVDS1. The pin definitions for dual-channel 24-bit LVDS are as follows: Signal Name Signal Name LVDSO_D0+ LVDSO_D0- LVDSO_D1+ LVDSO_D1- LVDSO_D2+ LVDSO_D2- LVDSO_CLK+ LVDSO_CLK- LVDS1 LVDSO_D3+ LVDSO_D3- EC7-1817LNAR - 11 -...
  • Page 17 TMDS Data2+ TMDS Data2 Shield TMDS Data2- TMDS Data1+ TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ TMDS Clock Shield TMDS Clock- Reserved (NC on device) DDC/CEC Ground Hot Plug Detect - 12 - EC7-1817LNAR...
  • Page 18 Signal Name LANE0P LANE1P LANE0N LANE1N LANE2P LANE3P LANE2N LANE3N AUXCHP AUXCHN RETURN DP_PWR 5、 DVI-D Connector Signal Name Signal Name DATA2- DATA2+ GND_DVI HOTPLUG DATA0- DDCCLK DATA0+ J1(DVI1) DDCDATA GND_DVI DATA1- DATA1+ GND_DVI GND_DVI CLK+ CLK- EC7-1817LNAR - 13 -...

  • Page 19: Audio Connector

    Status Indicating and Control Connector ATX Power Switch and HDD Indicating Connector (Pitch: 2.54mm) Signal Name Signal Name PWRBTN# RESET# HDD_LED- HDD_LED+ Power Indicator Connector (Pitch: 2.54mm) Signal Name PWR_LED+ Loudspeaker Output Connector (Pitch: 2.54mm) Signal Name SPEAKER - 14 - EC7-1817LNAR...

  • Page 20: Power Connector

    The hard disk shall support SATA 2.0 and use 15-pin SATA hard disk power connector. The driver of chipset shall support the hot-swap of SATA hard disk. Hot-swap of SATA hard disk with the operating system is forbidden when system is powered-on. EC7-1817LNAR - 15 -...
  • Page 21 Hot Plug Step 1: Please plug the 1 x 4 pin SATA power connector (white) into the power adapter. Step 2: Please connect the SATA data cable to the SATA connector on board. - 16 - EC7-1817LNAR...

  • Page 22: Lan Port

    Wake-on-LAN, LAN PXE booting and AMT7.0 functions. ACTLED and LILED are the green and dual-color LEDs beside the Ethernet port, which respectively indicates the activity status and the speed of LAN. Please refer to the status description for each LED: EC7-1817LNAR - 17 -...

  • Page 23: Switch

    The board provides one 1x4Pin CPU fan (CPUFAN1, Pitch: 2.54mm) and one 1x3Pin system fan (SYSFAN1, Pitch: 2.54mm). Pay attention to the following three issues when using the fan socket:  The current for fan shall not exceed 700mA (12V); - 18 - EC7-1817LNAR...

  • Page 24: Tpm Pin Header

    Note: FAN_IO: fan speed impulse output. TPM Pin Header The board provides one 2x10TPM pin header; PIN4 is NA, Pitch: 2.54mm. Signal Name Signal Name CLOCK LPC_FRAM PLT_RST- VCC5 VCC3.3 SMB_CLK SMB_DATA VCC3SB SERIRQ CLKRUN SUS_SATA- DRQ- EC7-1817LNAR - 19 -...

  • Page 25: Mini Pcie Connector

    Link5150 and Intel® WiFi Link 5350 wireless network card. MPCIE1 Signal Name Signal Name WAKE# +3.3V +1.5V CLKREQ# REFCLK- REFCLK+ Reserved Reserved W_DISABLE# PERST# PERn0 +3.3V PERp0 +1.5V SMB_CLK PETn0 SMB_DATA PETp0 USB_D- USB_D+ +3.3V +3.3V Reserved Reserved +1.5V Reserved Reserved +3.3V - 20 - EC7-1817LNAR...

  • Page 26: Pcie X4 Slot

    When the CPU is fully seated in the socket, fix the screws on CPU socket in clockwise direction via screwdrivers (refer to Figure ②). Do it with moderate force so as not to damage the CPU socket. EC7-1817LNAR - 21 -...

  • Page 27: Install The Cpu Fan

    When holding a board, please hold the edge instead of the cooling fin. - 22 - EC7-1817LNAR...

  • Page 28: Chapter 3 Bios Setup

    Please use the internal default value of UEFI to restore the system. Our company is constantly researching and updating UEFI, its setup interface may be a bit different. The figure below is for reference only; it may be different from your UEFI setting in use. EC7-1817LNAR - 23 -...

  • Page 29: Basic Function Setting For Uefi

    Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Set the Date. Use‘Tab’ to BIOS Information switch between Date Project Name EC7-1817LNAR BIOS Version Q5652010 C01 elements.→←: Select Screen Build Date and Time 11/18/2010 10:10:10 ↑↓: Select Item...
  • Page 30 TPM SUPPORT [Disabled] ↑↓：Select Item Enter：Select Current Status Information +/-：Change Opt NO Security Device Found F1：General Help F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc.  TPM SUPPORT Enable TPM function. EC7-1817LNAR - 25 -...
  • Page 31 Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc.  Hyper-threading Control switch for Hyper Threading Technology function.  Active Processor Cores Active the CPU core number, which is available for the CPU with multi-core.  Intel Virtualization Technology Switch for Intel Virtualization Technology. - 26 - EC7-1817LNAR...
  • Page 32 AHCI.  Port 0-5 Switch for SATA Port 0-5.  Hot Plug Switch for hot plugging the SATA Port.  External SATA Support switch for external SATA.  SATA Device Type Choose the SATA device type. EC7-1817LNAR - 27 -...
  • Page 33 Secure Mode Extensions (SMX) Support switch for Intel CPU SMX.  Intel TXT(LT) Support Support switch for Intel(R) TXT. Note: the Intel TXT (LT) Support option can be enabled when Intel Virtualization Technology option is enabled. - 28 - EC7-1817LNAR...
  • Page 34 Un-Configure ME [Disabled] Enter：Select +/-：Change Opt F1：General Help F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc.  Intel AMT Control switch for AMT function.  Disable ME Enable ME function control switch. EC7-1817LNAR - 29 -...
  • Page 35 This option is used to support legacy USB devices (keyboard, mouse and storage device, etc.); when this option is set to Enabled, the USB device could be used even if under OS that doesn’t support USB, such as DOS. - 30 - EC7-1817LNAR...
  • Page 36 Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc. Serial Port This option is used to enable or disable the serial port. Device Settings This option is used to display the current resource setting for the serial port. Change Settings EC7-1817LNAR - 31 -...
  • Page 37 This option is used to enable or disable the serial port. Device Settings This option is used to display the current resource setting for the serial port. Change Settings This option is used to configure the resource adopted by the serial port (IO and IRQ). - 32 - EC7-1817LNAR...
  • Page 38 CPU Temperature Current CPU temperature, monitored by the temperature sensor on motherboard.  SYSFAN1/CPUFAN1 Current CPU fan speed.  Vcore CPU core voltage.  V3.3/V12.0 Turn on/off the power to output voltage.  VBAT CMOS battery voltage. EC7-1817LNAR - 33 -...
  • Page 39 Display the information relevant to CPU. Note: the displayed CPU information is relevant to the CPU installed within the platform; different series CPU may have different display information.  EIST Enable the SpeedStep function of CPU.  Turbo Mode Enable the Turbo Mode function. - 34 - EC7-1817LNAR...
  • Page 40 Enter: Select System Agent (SA) Configuration +/-: Change Opt PCH-IO Configuration F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save ESC: Exit Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc. EC7-1817LNAR - 35 -...
  • Page 41 Enter：Select DVMT Pre-Allocated [64M] +/-：Change Opt DVMT Total Gfx Mem [256M] F1：General Help  LCD Control F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. Primary Display Choose the primary display type. - 36 - EC7-1817LNAR...
  • Page 42 Secondary IGFX Boot Display Choose the secondary display device during POST period. LCD Panel Type This option is used to choose the resolution for Flat Panel. Panel Color Depth Choose the bit number for Flat Panel. EC7-1817LNAR - 37 -...
  • Page 43 [Enabled] Enter：Select EHCI2 [Enabled] +/-：Change Opt F1：General Help USB Ports Per-Port Disable Control [Disabled] F2：Previous Values F3：Optimized Defaults F4：Save ESC：Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. EHCI 1 Switch for EHCI controller 1. EHCI 2 - 38 - EC7-1817LNAR...
  • Page 44 Switch for PCH LAN controller.  Restore AC Power Loss This option could set the system status when the computer is re-electrified after powered off under AC. “Power Off” is to make the system at power off status; EC7-1817LNAR - 39 -...
  • Page 45 Configure whether to display the content of OEM LOGO.  FAST Boot Switch for fast boot.  Hard Drive BBS Priorities This option is used to configure the priority of the boot device during system booting. - 40 - EC7-1817LNAR...
  • Page 46 Save Options F1: General Help Save Changes F2: Previous Values Discard Changes F3: Optimized Defaults F4: Save Restore Defaults ESC: Exit Save as User Defaults Restore User Defaults Boot Override Version 1.28.1119. Copyright (C) 2010,American Megatrends, Inc. EC7-1817LNAR - 41 -...
  • Page 47 Save user defaults.  Restore User Defaults Restore user defaults.  Boot Override This option lists all the booting options; users may choose one of the options and press <Enter>, then you may boot according to the option. - 42 - EC7-1817LNAR...

  • Page 48: System Resource Managed By Uefi Under X86 Platform

    ~ 03FFh) are adopted while the ports above 0400h are adopted by PCI and EISA connectors. Each peripheral will occupy portion of the space. The table below shows parts of the I/O connectors used in X86 platform. EC7-1817LNAR - 43 -...
  • Page 49 458h – 47Fh Motherboard Resource 4D0h – 4D1h Programmable Interrupt Controller 500h – 57Fh Motherboard Resource 680h – 69Fh Motherboard Resource A3h – A3Fh Motherboard Resource A79h ISAPNP Read Data Port 0D00h – 0FFFFh PCI BUS - 44 - EC7-1817LNAR...
  • Page 50 IRQ2 Reserved IRQ3 COM2 IRQ4 COM1 IRQ5 Reserved IRQ6 Reserved IRQ7 Reserved IRQ8 System CMOS/Real Time Clock IRQ9 ACPI-Compliant System IRQ10 Reserved IRQ11 Reserved IRQ12 Microsoft PS/2 Mouse IRQ13 Numeric data processor IRQ14 Reserved IRQ15 Reserved EC7-1817LNAR - 45 -...

  • Page 51: Chapter 4 Install The Drivers

    Chapter 4 Install the Drivers Chapter 4 Install the Drivers Regarding the driver program of this product, please refer to the accompanying CD. - 46 - EC7-1817LNAR...

  • Page 52: Appendix

    Description: the function, PreInitWDT, is used to initialize the registers relevant to WDT; please invoke the function before configuring and using WDT. Input: none Output: none Note: none #define INDEX_PORT 0x2E #define DATA_PORT 0x2F VOID PreInitWDT() outportb(INDEX_PORT, 0x87); outportb(INDEX_PORT, 0x87); outportb(INDEX_PORT, 0x07); outportb(DATA_PORT, 0x08); outportb(INDEX_PORT, 0x30); EC7-1817LNAR - 47 -...
  • Page 53 TIME_OUT_VALUE with the unit number of timeout value (0x01 ~ 0xFF) Note: SetWDT(int Wmode, int Wtime, int Timeout) unsigned char oldval, tempval, tempval2; outportb(INDEX_PORT,0xe0); tempval2 = inportb(DATA_PORT); tempval2 &= 0xef; outportb(DATA_PORT, tempval2); ;Set GPIO24 to output pin. outportb(INDEX_PORT,0xe9); - 48 - EC7-1817LNAR...
  • Page 54 &= 0xef; outportb(DATA_PORT, oldval); outportb(INDEX_PORT, 0x07); outportb(DATA_PORT, 0x08); outportb(INDEX_PORT,0xf7); outportb(DATA_PORT, Wmode); outportb(INDEX_PORT, 0x07); outportb(DATA_PORT, 0x08); outportb(INDEX_PORT,0xf5); If (Wtime == 0) outportb(DATA_PORT,0x08); Else outportb(DATA_PORT,0x00); outportb(INDEX_PORT,0xf6); If (Timeout == 0) outportb(DATA_PORT,0x00); Else outportb(DATA_PORT, Timeout); EC7-1817LNAR - 49 -...

  • Page 55: Gpio Programming Guide

    Output PINs include: GP47, GP76, GP36 and GP35)  Initialize digital I/O  Input/output program Initialize digital I/O #define INDEX_PORT 0x2E #define DATA_PORT 0x2F VOID PreInitGPIO() outportb(INDEX_PORT,0x87); outportb(INDEX_PORT,0x87); outportb(INDEX_PORT,0x07); outportb(DATA_PORT,0x09); outportb(INDEX_PORT,0x30); outportb(DATA_PORT,0x98); // enable GPIO3,4,7. outportb(INDEX_PORT,0x07); outportb(DATA_PORT,0x08); outportb(INDEX_PORT,0x30); outportb(DATA_PORT,0x02); //enable GPIO0 outportb(INDEX_PORT,0x24); Temp_val=inportb(DATA_PORT)&0xBF; - 50 - EC7-1817LNAR...
  • Page 56 0Xea); Temp_val=inportb(DATA_PORT) &0x9d; outportb(DATA_PORT, Temp_val); // //config gp31,35,36 to gpio. outportb(INDEX_PORT, 0Xee); Temp_val=inportb(DATA_PORT) &0x3F; outportb(DATA_PORT, Temp_val); // //config gp46，47 to gpio. outportb(INDEX_PORT,0x07); outportb(DATA_PORT,0x07); outportb(INDEX_PORT, 0Xec); Temp_val=inportb(DATA_PORT) &0xbf; outportb(DATA_PORT, Temp_val); // //config gp76 to gpio. EC7-1817LNAR - 51 -...
  • Page 57 0Xf0); Temp_val=(inportb(DATA_PORT)|0x40)&0x7F; outportb(DATA_PORT, Temp_val); // //config gp46 input, gp47 output. outportb(INDEX_PORT,0x07); outportb(DATA_PORT,0x07); outportb(INDEX_PORT, 0Xe0); Temp_val=inportb(DATA_PORT)&0xBF; outportb(DATA_PORT, Temp_val); //gp76 output. outportb(INDEX_PORT,0x07); outportb(DATA_PORT,0x08); outportb(INDEX_PORT, 0Xe0); Temp_val=inportb(DATA_PORT) |0x60; . outportb(DATA_PORT, Temp_val); //config gp05,06 to input Complete programming Outportb(0x2e, 0xaa); - 52 - EC7-1817LNAR...

  • Page 58: Troubleshooting And Solutions

    Remove booted the two pins to their original location with tweezers well. carefully, insert the memory, reboot the system and the EC7-1817LNAR - 53 -...
  • Page 59 OK. Re-install detected. the device driver and check whether it can be recognized; check whether the device is normal; if the device is normal, then check whether the device is compatible with the motherboard. - 54 - EC7-1817LNAR...

Table of Contents