1. Manuals
  2. Brands
  3. EVOC Manuals
  4. Motherboard
  5. EC0-1815V2NAR
  6. User manual

EVOC EC0-1815V2NAR User Manual

Atx motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EC0-1815V2NAR
ATX 单板
ATX Motherboard
Version: C01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC0-1815V2NAR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EVOC EC0-1815V2NAR

Summary of Contents for EVOC EC0-1815V2NAR

  • Page 1 EC0-1815V2NAR ATX 单板 ATX Motherboard Version: C01...

  • Page 2: Copyright Notice

    Trademarks EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other product names mentioned herein are used for identification purposes only and may be trademark and/or registered trademarks of their respective companies.

  • Page 3: Safety Instructions

    Safety Instructions Please read this manual carefully before using the product; Leave the board or card in the antistatic bag until you are ready to use it; Touch a grounded metal object (e.g. for 10 seconds) before removing the board or card from the anti-static bag;...

  • Page 4: Table Of Contents

    Contents Chapter 1 Product Introduction..................1 Overview ........................1 Mechanical Dimensions, Weight and Environment ..........1 Typical Consumption ....................1 Microprocessor ......................2 Chipset ........................2 System Memory .......................2 Display Function ......................2 Network Function ....................3 Audio Function ......................3 Power Feature ......................3 Expansion Bus ......................3 Watchdog Function ....................3 Operating System.....................3 On-board I/O......................4 Chapter 2 Installation....................5...
  • Page 5 ATX Power Switch and Hard Disk Indicator Connector..........9 Power Indicator Connector..................9 Loudspeaker Output Connector................10 7pin SATA Connector.....................10 KB/MS Connector....................10 USB Port ........................10 Audio Connector ....................11 GPIO Connector.....................12 TPM Connector......................13 LAN Port........................13 2x8 Pin VGA Connector ..................14 Display Port ......................14 DVI Connector.......................14 Motherboard Power Supply Connector ..............15 3-pin System Fan Connector ..................15 4-pin CPU Fan Connector ..................16...
  • Page 6 UEFI Overview......................24 UEFI Parameter Setup....................24 Basic Function Setting for UEFI ................25 System Resource Managed by UEFI under X86 Platform ........41 Chapter 4 Installing the Drivers..................46 Appendix ........................47 BPI Overview......................47 Troubleshooting and Solutions................48...

  • Page 7: Chapter 1 Product Introduction

    Chapter 1 Product Introduction Chapter 1 Product Introduction Overview EC0-1815V2NAR is an ATX single board computer, developed based on Intel® Q77 chipset. It complies with Ivy Bridge/Sandy Bridge LGA1155 dual core/quad core processor; supports 1600/1333/1066MHz DDR3 memory up to 16GB; six SATA high speed connectors, supporting RAID0/1/5/10;...

  • Page 8: Microprocessor

     VGA supports 2048x1536@75HZ, 32bit color depth in maximum, DVI supports 1920x1200@60HZ maximum, while supports 2560x1600@60HZ in maximum. Note: triple display function only supports two DisplayPorts with VGA or DVI mode. - 2 - EC0-1815V2NAR...

  • Page 9: Network Function

    Provides four 32-bit PCI slots, complying with PCI Rev2.3 standard; one PCI Express x16 slot, complying with PCI Express 1.0, 2.0 and 3.0 standards; one PCI Express x4 slot(EC0-1815V2NAR-01 is not supported), complying with PCI Express 1.0 and 2.0 standards.

  • Page 10: On-Board I/O

    One PS/2 keyboard/mouse connector;  One TPM connector;  One 16-channel digital I/O connector; Tips: how to identify the alarms 1. Long “beep” indicates system memory error; 2. Short “beep” indicates to power on the computer. - 4 - EC0-1815V2NAR...

  • Page 11: Chapter 2 Installation

    Warning! Please adopt appropriate screws and proper installation methods (including board allocation, CPU and heat sink installation, etc); otherwise, the board may be damaged. It is recommended to use M3x6 GB9074.4-88 screws at H1 ~ H7. EC0-1815V2NAR - 5 -...

  • Page 12: Locations Of Connectors

    Chapter 2 Installation Locations of Connectors AUDIO1 DVI1 VGA1 SATA1 SATA6 SATA4 DIMM1 JCC1 SATA5 SATA3 SATA2 DIMM2 - 6 - EC0-1815V2NAR...

  • Page 13: Structure

    Tip: How to identify the first pin of the jumpers and connectors Observe the letter beside the socket: the first pin is usually marked with “1” or bold lines or triangular symbols; Observe the solder pad on the back; the square pad is the first pin. EC0-1815V2NAR - 7 -...

  • Page 14: Jumper Setting

    Please set the mode for COM1/COM2 by JP2 ~ JP7 (Pitch: 2.54mm): Signal Name RS-232 (Default) RS-485 JP2/JP5 JP3/JP4/JP6/JP7 Please set the mode of Pin9 on COM3/COM4 by JP8 and JP9 (Pitch: 2.54mm): Definitions for Pin9 1-2 (Default) JP8/JP9 - 8 - EC0-1815V2NAR...

  • Page 15: Serial Port

    2. The pin definitions for Pin9 on COM3 and COM4 include RI#/5V/12V. Status Indicating and Control Connector ATX Power Switch and Hard Disk Indicator Connector Signal Name Signal Name PWRBTN# RESET# (Pitch: 2.54mm) HDD_LED- HDD_LED+ Power Indicator Connector Signal Name PWR_LED+ FP2 (Pitch: 2.54mm) EC0-1815V2NAR - 9 -...

  • Page 16: Loudspeaker Output Connector

    Signal Name KB_DATA MS_DATA KB_CLK MS_CLK USB Port The board provides four USB 3.0 ports, brought out by rear panel; the other two USB 2.0 ports are brought out by 2x5Pin headers (Pitch: 2.54mm). 1. USB3.0 Port: - 10 - EC0-1815V2NAR...

  • Page 17: Audio Connector

    The board provides AUDIO JACK function (Default), 5.1 track output, SPDIF and dual channel power amplify output (optional). Signal Name LINE_IN LINE_OUT MIC_IN AUDIO1 Signal Name Signal Name FRONT_R FRONT_L GND_AUDIO GND_AUDIO SURR_R SURR_L GND_AUDIO GND_AUDIO (5.1 track output) CENTER_OUT LFE_OUT (Pitch: 2.54mm) EC0-1815V2NAR - 11 -...

  • Page 18: Gpio Connector

    GPIO2 GPIO6 GPIO3 GPIO7 GPIO4 GPIO8 GPIO9 GPIO13 GPIO10 GPIO14 GPIO11 GPIO15 GPIO1 GPIO12 GPIO16 (Pitch: 2.54mm) Note: the factory default value of GPIO is TTL input and the voltage range for input/output signal is 0-5V. - 12 - EC0-1815V2NAR...

  • Page 19: Tpm Connector

    LAN. Please refer to the status description for each LED: LAN1/LAN2 LILED LAN Speed ACTLED LAN Activity (Dual-Color: O/G) Indicator (Green) Status Indicator Green 1000Mbps Blink Data being transmitted Orange 100Mbps No data being transmitted 10Mbps EC0-1815V2NAR - 13 -...

  • Page 20: 2X8 Pin Vga Connector

    Signal Name Signal Name LANE0P LANE0N LANE1P LANE1N LANE2P LANE2N LANE3P LANE3N DP1/DP2 AUXCHP AUXCHN RETURN DP_PWR DVI Connector Signal Signal Name DATA2- DATA2+ DATA1- DATA1+ DATA0- DATA0+ DVI1 CLK+ CLK- (Pitch: 2.0mm) HPDET DDCDATA DDCCLK - 14 - EC0-1815V2NAR...

  • Page 21: Motherboard Power Supply Connector

    2. 24pin ATX Power Connector (Pitch: 4.2mm) Signal Name Signal Name +3.3V +3.3V +3.3V -12V PS_ON# PWROK +5VSB +12V PWR2 +12V +3.3V 3-pin System Fan Connector Signal Name +12V SYSFAN1 FAN_IO Pitch: 2.54mm Note: FAN_IO: fan speed impulse output. EC0-1815V2NAR - 15 -...

  • Page 22: 4-Pin Cpu Fan Connector

    When the CPU is fully seated in the socket, close the upper cover on CPU socket and then lock the CPU into place by the clip. Installing the CPU Fan Please install the CPU fan as follows: (refer to the figure below): - 16 - EC0-1815V2NAR...
  • Page 23 Note! It is recommended to use cooling fan authenticated by Intel; before installing the fan, smear the heat sink compound on the surface between CPU and the fan cooling fin to improve the heat dissipation performance. EC0-1815V2NAR - 17 -...

  • Page 24: Pci Connector

    PCI_REQ# PCI_AD10 PCI_PME# PCI_AD9 PCI_AD30 PCI_C/BE#0 PCI_AD31 PCI_AD8 +3.3V +3.3V PCI_AD29 PCI_AD7 PCI_AD28 PCI_AD6 +3.3V PCI_AD26 PCI_AD4 PCI_AD27 PCI_AD5 PCI_AD25 PCI_AD3 PCI_AD24 PCI_AD2 +3.3V PCI_IDSEL PCI_AD0 PCI_C/BE#3 PCI_AD1 +3.3V PCI_AD23 PCI_AD22 PCI_REQ64# PCI_ACK64# PCI_AD20 PCI_AD21 PCI_AD19 - 18 - EC0-1815V2NAR...

  • Page 25: Pcie X16 Connector

    PERn3 RSVD RSVD PRSNT2#A RSVD PETp4 PETn4 PERp4 PERn4 PETp5 PETn5 PERp5 PERn5 PETp6 PETn6 PERp6 PERn6 PETp7 PETn7 PERp7 PERn7 PRSNT2#B RSVD PETp8 PERp8 PETn8 PERn8 PETp9 PERp9 PETn9 PERn9 PETp10 PERp10 PETn10 PERn10 PETp11 EC0-1815V2NAR - 19 -...

  • Page 26: Pcie X4 Connector

    PETn15 PERn15 PRSNT2#C RSVD PCIe x4 Connector The board provides one PCIE x16 slot (PCIE2), supporting PCIE x4 signals (EC0-1815V2NAR-01 not support this interface). The pin definitions are as follows: Signal Name Signal Name Signal Name Signal Name PRSNT1# +12V...

  • Page 27: Hot-Swap Of Sata Hard Disk

    AHCI mode and the hot swap option is enabled. The driver of chipset shall support the hot-swap of SATA hard disk. Hot-swap of SATA hard disk with the operating system is forbidden when system is powered-on. EC0-1815V2NAR - 21 -...
  • Page 28 Step 1: Please plug the 1 x 4 pin SATA power connector (white) into the power adapter. Step 2: Please connect the SATA data cable to the SATA connector on board. Step 3: Please connect the 15-pin SATA power connector (black) to the SATA hard disk. - 22 - EC0-1815V2NAR...
  • Page 29 Hot Unplug Step 1: Uninstall the hard disk from the device manager. Step 2: Unplug the data cable from the SATA hard disk. Step 3: Unplug the SATA 15-pin power connector (black) from the SATA hard disk. EC0-1815V2NAR - 23 -...

  • Page 30: Chapter 3 Bios Setup

    Please use the internal default value of UEFI to restore the system. Our company is constantly researching and updating UEFI, its setup interface may be a bit different. The figure below is for reference only; it may be different from your UEFI setting in use. - 24 - EC0-1815V2NAR...

  • Page 31: Basic Function Setting For Uefi

    Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Copyright (C) Main Advanced Chipset Boot Security Save & Exit Set the Date. Use ‘Tab’ to switch BIOS Information Project Name EC0-1815V2NAR between Date elements. BIOS Name J5044000 →←: Select Screen BIOS Version ↑↓: Select Item...
  • Page 32 [Disabled] ↑↓: Select Item Enter: Select Current Status Information +/-: Change Opt NO Security Device Found F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save ESC: Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. - 26 - EC0-1815V2NAR...
  • Page 33 CPU installed in the platform; different series of CPUs will display different information.  Active Processor Cores Active CPU core number, only available for multi-core CPU.  Intel Virtualization Technology Switch for the Intel Virtualization Technology. EC0-1815V2NAR - 27 -...
  • Page 34 Serial ATA Port 1 ~ 6 Serial ATA Port1 ~ 6 dynamically detect whether there are SATA devices on motherboard. If devices are connected with the corresponding ports, then it will display the SATA device type. Otherwise, it will display “Empty”. - 28 - EC0-1815V2NAR...
  • Page 35 →←: Select Screen Un-configure ME [Disabled] ↑↓: Select Item Disable ME [Disabled] Enter: Select +/-: Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save ESC: Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. EC0-1815V2NAR - 29 -...
  • Page 36 USB, such as DOS. When it is set to Disabled, the legacy devices cannot be used in the OS that does not support USB. Note: USB can be used in EFI application, such as in Shell. - 30 - EC0-1815V2NAR...
  • Page 37 Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. * Serial Port This option is used to enabled or disable the current serial port. * Device Settings This option is used to display the current resource configuration of the serial port. EC0-1815V2NAR - 31 -...
  • Page 38 Current CPU temperature, monitored by the temperature sensor on motherboard.  SYSFAN1/CPUFAN1 Monitor the speed of the current system fan and the CPU fan.  Vcore CPU core voltage.  V3.3/ V5.0/V12.0 Turn on/off the power to output voltage.  VBAT CMOS battery voltage. - 32 - EC0-1815V2NAR...
  • Page 39 Enter: Select +/-: Change Opt  PCH-IO Configuration F1: General Help  System Agent (SA) Configuration F2: Previous Values F3: Optimized Defaults F4: Save ESC: Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. EC0-1815V2NAR - 33 -...
  • Page 40 “Power On” is to power on the system automatically; “Last State” is to recover the status before powering off.  Audio Internal Codec Enable the control switch of audio internal codec.  Audio codec Port DP1 - 34 - EC0-1815V2NAR...
  • Page 41 Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. XHCI Mode Enable xhci mode control. HS Port #1~4 Switchable Enable xhci and ehci switch function. EHCI 1 Switch for EHCI controller 1. EHCI 2 Switch for EHCI controller 2. USB Ports Per-Port Disable Control EC0-1815V2NAR - 35 -...
  • Page 42 F4: Save ESC: Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc.  VT-d Switch for the Intel virtualization technology.  PEG0 – Gen X Speed control switch for PCIE1.  De-emphasis Control De-emphasis control switch for PCIE1. - 36 - EC0-1815V2NAR...
  • Page 43 Primary Display This option is used to specify the display device type with boot priority.  DVMT Pre-Allocated Select the memory size pre-allocated by DVMT.  DVMT Total Gfx Mem Select the DVMT total Gfx memory size. EC0-1815V2NAR - 37 -...
  • Page 44 64GB); it will map the addresses occupied by the traditional devices less than 4G, such as BIOS, APIC, PCIE and PCI MEMORY, etc. to the memory above 4G. Therefore, when plenty of the physical memories are adopted, the OS can make full use of the physical memories. - 38 - EC0-1815V2NAR...
  • Page 45 #n represents the lowest priorities.  Hard Drive BBS Priorities This option is used to configure the priorities of the legacy devices in BBS. #1 represents the highest priorities while #n represents the lowest priorities. EC0-1815V2NAR - 39 -...
  • Page 46 ↑↓: Select Item Discard Changes and Reset Enter: Select +/-: Change Opt Boot Override F1: General Help F2: Previous Values Netac UEFI: Netac F3: Optimized Defaults F4: Save ESC: Exit Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc. - 40 - EC0-1815V2NAR...

  • Page 47: System Resource Managed By Uefi Under X86 Platform

    APIC and provide more than 16 interrupt sources, like IRQ16 - IRQ23; while some others can have up to 28 interrupt sources, such as motherboard supporting PCI-X. However, relevant OS are required to enable that function. EC0-1815V2NAR - 41 -...
  • Page 48 03Ch – 03Dh Programmable Interrupt Controller 040h - 043h System Timer 044h - 05Fh Motherboard Resource 04Eh - 04Fh Motherboard Resource 050h - 053h System Timer 060h Standard 101/102 Key or Microsoft Natural PS/2 Keyboard 061h Motherboard Resource - 42 - EC0-1815V2NAR...
  • Page 49 Motherboard Resource 0A4h - 0A5h Programmable Interrupt Controller 0A8h - 0A9h Programmable Interrupt Controller 0ACh - 0ADh Programmable Interrupt Controller 0B0h – 0B1h Programmable Interrupt Controller 0B2h – 0B3h Motherboard Resource 0B4h – 0B5h Programmable Interrupt Controller EC0-1815V2NAR - 43 -...
  • Page 50 Motherboard Resource 4D0h – 4D1h Programmable Interrupt Controller 500h - 57Fh Motherboard Resource 680h - 69Fh Motherboard Resource A00h – A0Fh Motherboard Resource A30h – A3Fh Motherboard Resource A79h ISAPNP Read Data Port 0D00h-FFFFh PCI bus - 44 - EC0-1815V2NAR...
  • Page 51 IRQ3 COM2 IRQ4 COM1 IRQ5 Reserved IRQ6 Reserved IRQ7 Reserved IRQ8 System CMOS/Real Time Clock IRQ9 ACPI-Compliant System IRQ10 Reserved IRQ11 COM3/4/5/6 IRQ12 Mouse IRQ13 Numeric data processor IRQ14 Master IDE Channel IRQ15 Slave IDE Channel EC0-1815V2NAR - 45 -...

  • Page 52: Chapter 4 Installing The Drivers

    Chapter 4 Installing the Drivers Chapter 4 Installing the Drivers Regarding the driver program of this product, please refer to the enclosed CD. - 46 - EC0-1815V2NAR...

  • Page 53: Appendix

    Appendix Appendix BPI Overview EVOC BPI (BIOS Programming Interface) is a cross-platform, easy-to-maintain software interface specification, which supports access to hardware under the Protected Mode of the operating system. The function of the product is to provide a unified standard interface for the application software or driver; therefore, when the hardware of the motherboard is upgraded, there is no need to modify the application software or driver and the former software can operate on the new platform normally.

  • Page 54: Troubleshooting And Solutions

    Analysis: it could result from improper operation when no display after inserting or removing the memory and cause abnormal replacing with a operation of the components on the motherboard. Focus memory on the circuit related to the memory on the motherboard. - 48 - EC0-1815V2NAR...
  • Page 55 PCI card requires 3.3V voltage, then the system. AT power shall be replaced with ATX power because AT power cannot provide 3.3V voltage. (Suggestion: when purchasing power supplies, please check whether the PCI card in use requires 3.3V voltage or not). EC0-1815V2NAR - 49 -...
  • Page 56 OK. Re-install detected. the device driver and check whether it can be recognized; check whether the device is normal; if the device is normal, then check whether the device is compatible with the motherboard. - 50 - EC0-1815V2NAR...

Table of Contents