User Illumination Color Setting; Adjusting Clock - Kenwood DPX-3030 Instruction Manual

General features

User Illumination Color Setting

The Illumination Color by the adjustment of RGB can arbitrarily
set.
1
Enter the Illumination Color Select mode
Press the [COLOR] button.
"Illumi" is displayed.
2
Select the Color for adjustment
Press the [4] or [¢] button.
Each time the button is pressed, the colors that can be adjusted
switch as shown below:
Adjustment Color
Red
Green
Blue
3
Adjust the Color
Press the [FM] or [AM] button.
Each time the button is pressed, the intensity of color changes
as shown below:
Intensity of color
Turning off
Weak
Dark
4
Exit the Illumination Color Select mode
Press the [COLOR] button for at least 1 second.
When operation stops for 10 seconds, the Illumination Color at
that time is determined and the Illumination Color Select mode
automatically closes.
Display
"R" is blinks
"G" is blinks
"B" is blinks
Display
"X-0"
"X-1"
"X-4"
— 14 —

Adjusting Clock

1
Select the clock display
Press the [DISP] button.
2
Enter clock adjustment mode
Press the [DISP] button for at least 1 second.
The ‡ indicator blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit clock adjustment mode
Press the [DISP] button.