Memorizing The Channels - Sanyo LCD-32XR11F Instruction Manual

Note: If the Lock System is On, Auto Tuning/DTV manual tuning/ATV manual tuning can not be operated
without password. For details, please see <Setting Child and Rating Locks> section.
Auto Tuning
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Select Move
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
Country selection
ATV Manual Tuning
Start Cancel
Programme Edit
Select Move
DTV manual tuning
- digital only -
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Select Move
DTV Manual Tuning
UHF CH 45
Searching, Please Wait ...
Bad Normal Good
OK MENU
Search Return

Memorizing the Channels

Auto Tuning will completely re-tune the TV and can be used to
update the channel list.
It is recommended that Auto Tuning is run periodically to ensure
that all new services are added. All current channels and settings, e.g.
LOCK CHANNEL
locked channels, will be lost.
Note:
As new services are broadcast, it will be necessary to retune the TV in
order to view them.
1
Go to Input Source menu and select ATV or DTV first.
Return
MENU
Press MENU. Press 3
2
6
to access.
3
Highlight Auto Tuning item, and press 4
LOCK CHANNEL
Now a pop-up screen opens with Country selection
4
Australia
highlighted. Press 3
New Zealand. Then press 6
OK to begin the auto tuning.(If you want to cancel, press4
select Cancel and press OK.)
Return
MENU
All ATV/DTV channels available in your area will be searched and
stored into memory. Please wait until the searching is complete.
5
During the process, if you want to skip, press MENU. To exit
searching, press EXIT.
This feature is available for service engineers or can be used for direct
channel entry if the multiplex channel is known.
1
In CHANNEL menu, press 6
LOCK CHANNEL
Tuning, then press4
2
Press 3
If the selected channel has no signal, "NO SIGNAL" will appear.
3
Press OK to begin the search for that multiplex.
At the bottom of the menu screen the DTV Signal strength bar
Return
MENU
is displayed. You can make use of it to check how strong your
DTV signal is and whether you need to adjust your antenna. The
higher the signal strength is, the less likely you are to experience
picture degradation.
4
When the multiplex is found, any channels that are not currently
in the channel list will be added and the channel information will
be updated.
During the process, you can press MENU or EXIT to exit the
search.
or4 to select CHANNEL menu, press
or4 to select your region: Australia or
to highlight Start, simply press
or5
or OK to access.
or4 button to select your desired multiplex number.
or OK to access.
to
to select DTV Manual
17