Tuning Of The Channels - Sanyo C14ZA25 Instruction Manual

Up to 30 broadcast stations in your reception area can be stored in the
Tuning of the Channels
.Iectronic memory.
There are three ways of tuning as follows;
Automatic Tuning (the basic way)
All receivable channels are automatically tuned in and memorized in consecutive programme position.
Search Tuning
Use to preset a receivable channel in any desired programme position, e.g. the position with the same number as the
channel.
Manual Tuning
Manually tune a channel if it cannot be automatically tuned, such as when the signal is poor.
(1) Press the MEMORY/PRESET button ~ .
4 II
(2) Press the LEVEL(+) Q button.
o ,~
—A +
VPA
9(7
I
/
LEVEL(+)
The channels are preset in consecutive positions begining
from the programme position "1".
After all available channels have been preset, the unit
returns to the position "1".
Note: To cancel automatic tuning midway, press the
MEMORY/PRESET @ or Power ON/OFF ~
button.
AUTO TUNING
@_.:,*( yG ,,
11-------------- '—-3"
------- .
r ------- .
I
i
1
+""'"":
Channel Copy
Example: To copy the TV channel in the programme position 2 into the programme position 6
(1)Select programme position 2 using Programme selector ~.+
2
I
(2) Press the MEMORY/PRESET button ~ 3 times. +
E
,'", q. 'm
(3) Select the programme position 6 using Programme UP/DOWN ~
button of the TV set. Mm...: . . . . . . .+
(4) Press FUNCTION button @
, ._> ~~
MANUALTUNING
(5) Press the MEMORY/PRESET button ~.
L
-
–11–