ZyXEL Communications NSA-2400 User Manual page 111

Table 45 Storage > Disk (continued)
LABEL
Volume
Disk Configuration
Capacity
Status
Action
NSA-2400 User's Guide
DESCRIPTION
This field shows which volume the disk belongs to. It shows No Volume if
it does not (yet) belong to a volume.
This shows the volume storage system to which the disk belongs. See
Section 7.3 on page 97 and
on storage systems.
This field shows the size of the hard disk.
This field shows if the hard disk is functioning normally.
Click the Scan Disk icon to scan a hard disk drive for bad sectors and file
system errors.
Note: All users must disconnect from the NSA before the
disk scan can begin.
For external hard disks, there are additional Disconnect, Locate and
Initialize icons.
Make sure to click the Disconnect icon before you remove an external
drive so that you do not lose data that is being transferred to or from that
hard drive.
Click the Locate icon to cause the corresponding USB LED on the NSA to
blink.
Click the Initialize icon for the NSA to create a volume on the (external)
hard drive. You can configure an external disk as either JBOD or
BACKUP only!
Chapter 7 Storage Screens
Section 7.4 on page 100 for more information
111