Table of Contents
Advertisement
10
LYNX MODEL LX-85A NON-DIRECT VENT, VENTING THROUGH A ROOF
ALL JOINTS MUST BE LIQUID AND PRESSURE TIGHT. USE 76 mm (3") DIA. PVC/CPVC SCHEDULE 40 PIPE FOR AIR INTAKE OR U/L LISTED
SINGLE WALL 76 mm (3") DIA. AL129-4C STAINLESS STEEL VENTING MATERIAL (see page 6) OR CERTIFIED PVC OR CPVC VENTING
Figure 9. Lynx model LX-85A - non-direct vent, venting through the roof
* AL 29-4C IS A REGISTERED TRADEMARK OF ALLEGHENY LUDLUM CORP .
CERTIFIED TO THE STANDARD FOR TYPE BH GAS VENTING SYSTEMS, ULC S636.
3.05m (10') MIN
SLOPE UP 20mm/m
(1/4 in/ft) MIN
305mm (1') MIN
51mm (2") MIN
76mm (3") DIA. CERTIFIED PVC
OR CPVC VENTING PIPE OR
STAINLESS STEEL VENTING
MATERIAL FOR VENT
76mm (3") DIA. CERTIFIED PVC
OR CPVC VENTING PIPE OR
STAINLESS STEEL VENTING
MATERIAL FOR VENT
Lynx Model LX-85A
Advertisement
Table of Contents
