Husky T-124C Owner's Manual And Assembly Manual page 26

26
Mount freewheel side wheel on the left axle. Make sure that the
spacer is placed between the wheel's sealed bearing and axle
bearing (see the picture on next page). Replace the washer and
tighten the axle nut.
Spacer
Before mounting the front wheel, attach the front fender to the fork
and secure the two fender braces to the front fork using the
machine screws on the fork's dropouts. Mount the wheel on the
front fork. Once you have mounted the wheel, tighten the axle
nuts.
STEP 3 - Handlebar, Brake, Pedals, Saddle
HANDLEBAR - Attach the handlebar stem by inserting it into head
tube. Adjust the stem height but DO NOT EXTEND BEYOND
"MINIMUM" MARK. Secure the stem bolt but do not tighten yet.
Place the handle bar on the stem, adjust the handlebar to desired
position and tighten the stem clamp screw. Now you can tighten
the stem bolt making sure that the front wheel is lined up with the
frame tube.