Husky T-124C Owner's Manual And Assembly Manual page 17

17
COASTER BRAKE HUB
For the coaster brake to operate properly, it must be centered and
securely attached to the frame. The coaster brake arm is bolted to the
arm bracket on the frame. A loose or detached coaster brake arm will
cause serious damage to the braking mechanism and the internal parts of
the coaster brake. Inspect the brake arm bolt regularly.
Coaster brake arm
REAR AXLE AND BEARINGS
T-124C/244 model has a 17mm solid steel rear axle. The axle is
supported by eight sealed cartridge bearings on the axle housing and rear
wheels. The rear drive sprocket is mounted on the axle using an axle key
and a set screw. When the set screw is loose, the sprocket can slide to
left or right to allow correct positioning, in a straight line with the
corresponding sprocket on the coaster brake hub.