Hitachi DH 24DV Technical Data And Service Manual page 13

E. Driling hole (rotation only)
Drill chuck (13VLD-D)
Chuck wrench
(NOTE)
The 13VLD-D drill chuck and chuck adapter (D) cannot be used for reverse rotation. If reverse rotation is to be
used for loosening screws, use the cross-recessed head (Phillips) bit (bit No. 2), described below, by attaching it
directly to chuck adapter (D).
Chuck adapter (D) (for SDS-plus shank type)
13 mm (1/2") Drill chuck 13VLD-D (with chuck wrench)
F. Driving screws (rotation only)
Phillips (plus) driver bit [overall length: 25 mm] (for cross-recessed head screw)
Bit No.
Screw size
Bit No.
3 --- 5 mm
No. 2
No. 3 6 --- 8 mm
G. Grease for electric impact drill
Containing 500 g (1.1 lbs.): Code No. 980927
Containing 30 g (0.07 lbs.): Code No. 981840
70 g (0.15 lbs.): Code No. 308471
For drilling holes in steel and wood
• • •
Part name
Chuck adapter (D)
(SDS-plus shank)
Code No.
971511Z
971512Z
Chuck adapter (D)
(SDS-plus shank)
Code No.
303624
321813
--- 10 ---