Honeywell VisionPro TH8000 Series Operating Manual page 14

Operating Manual
;""()gram• • • • sci1edu·.IEJ.override. • . . (tem
Adjust temperature
Press to set timer
Press CANCEL (or SCHED) to
resume program schedule
Press
.A.
or
T
to immediately adjust the tem­
perature. This will temporarily override the
temperature setting for the current time period.
The new temperature will be maintained only
until the time you set. When the timer expires,
the program schedule will resume and set the
temperature to the level you've programmed
for the current time period.
To cancel the temporary setting at any time,
press CANCEL (or SCHED). The program schedule
will resume.
12