Searching For Outdoor Unit - Bryant Evolution Connex SYSTXBBECW01-A Installation Instructions Manual

5.2.

Searching for Outdoor Unit

The Evolution Connex Control will then proceed to communicate with the outdoor
unit by displaying "Searching for outdoor unit". This includes Evolutionr small
packaged products (SPP), with UI Version 8.0 software or later.
NOTE: If the outdoor unit cannot be found, the control will display "Outdoor unit
not found".
Select the appropriate unit installed; then, touch NEXT.
S
AC1Stage – 1- - stage air conditioner
d
*AC2Stage – 2- - stage air conditioner
d
*HP1Stage – 1- - stage heat pump
d
*HP2Stage – 2- - stage heat pump
d
None – No outdoor unit installed
d
NOTE: For small packaged products (SPP), the selection screen is not needed and
will not appear.
The installer will first be instructed to select the appropriate size of the outdoor
S
unit; then, touch SELECT.
*Network Interference Module (NIM) may be required for these selections to be displayed.
17
A12178