Safety Precautions - Kenwood KAC-816 Instruction Manual

Safety precautions

2WARNING
Take the following precautions to
prevent fire and avoid personal
injury :
• When extending the battery cable, or
ground cable, use 5mm
larger automotive grade cable to avoid
cable deterioration or damage to the
covering.
• Check that no metal objects (coins, tools,
etc.) are left inside the unit to avoid short
circuits.
• If you smell or see smoke, turn the
power off immediately and consult your
Kenwood dealer.
• Do not touch the unit during use because
the surface of the unit becomes hot and
may cause burns if touched.
2CAUTION
Take the following precautions to
keep the unit in proper working
order.
• Be sure the unit is connected to a 12V
DC power supply with a negative ground
connection.
Accessories
Part name
Battery cable
(Yellow) (6 m)
Ground cable (Black)
(1 m)
Self-tapping screws
(ø4 16 mm)
Terminal cover
(Power terminal)
2
2 (AWG10) or
External Number
View of Items
1
1
4
1
• Do not open the top or bottom cover.
• Do not install the unit in places it is
exposed to direct sunlight, high heat or
humidity, water may splash over it, or
dust exists.
NOTE
If you have difficulty in installing this unit
in your vehicle, contact your Kenwood
dealer.
Cleaning the unit
If the surface is dirty, wipe it clean with a
silicon cloth or soft dry cloth with the
power off.
2CAUTION
Do not use hard cloths or paint thinner,
alcohol, or other volatile solvents. These
may damage external surfaces or remove
indicator characters.
Part name
Round terminal
(Large)
Round terminal
(Medium)
Round terminal
(Small)
Grommets
External Number
View of Items
1
2
1
1