Kenwood KAC-816 Instruction Manual page 6

Connection
RCA cable connection
2CAUTION
Do not connect cables and
leads to both RCA cable input
jacks and the speaker input
terminals simultaneously, for
this may cause malfunction
or damage.
15Hz
OFF 25Hz
INFRASONIC
RCA cable ground terminal
When using an RCA cable with
a ground lead attached, connect
the ground lead to this terminal.
Speaker level input connection
Left output
Right output
Speaker level input terminals
Lead terminal
(Commercially
available parts)
15Hz
OFF 25Hz
INFRASONIC
2CAUTION
• The genuine-accessory car stereo shall have a maximum power output of no more than 25 W.
• Do not connect the speaker output leads from a power amplifier (Optional) to the speaker input
terminals of this unit, for this may cause malfunction or damage.
• Do not connect cables and leads to both RCA cable input jacks and the speaker input terminals
simultaneously, for this may cause malfunction or damage.
• Connect the power control lead to a power supply which can be turned ON/OFF by the ignition
key switch (ACC line).
With this connection, shock noise may be generated when the power of the genuine-accessory
car stereo is switched ON/OFF.
6
Left output (White)
Right output (Red)
Left input
LPF INPUT
LINE IN
FREQUENCY(Hz) SENSITIVITY(V)
0.5 R
L
150
100
0.3
1
GND
70
2
3
4
50 200 5 0.2
Left input
LPF INPUT
LINE IN
FREQUENCY(Hz) SENSITIVITY(V)
0.5 R
L
150
100
0.3
1
GND
70
2
3
4
50 200 5 0.2
CENTER UNIT
(Cassette receiver,
CD receiver, etc.)
RCA cable
(Commercially
available part)
Right input
SPEAKER LEVEL INPUT
LEFT RIGHT
2CAUTION
Do not use this terminal for power source
grounding. This unit will be damaged if the
power source grounding wire is connected
to this terminal.
Genuine-accessory
car stereo
Right input
SPEAKER LEVEL INPUT
LEFT RIGHT
Power control cable
(Commercially
available part)
MONO
POWER AMPLIFIER
ACC
+ -
Battey
MONO
POWER AMPLIFIER