Hold; Placing A Call On Hold; Releasing A Call On Hold - GE 29488 User Manual

4-line caller id intercom speakerphone
Table of Contents

Advertisement

Available languages

Available languages

H
OLD
P
C
H
LACING A
ALL ON
1. Press the HOLD button. The indicator for the line on hold flashes green.
2. Hang up or press another line button.
The phone emits a beep every 30 seconds as a reminder. At the other stations, the indicator blinks red but no beep
is heard.
NOTE: If you put a call on HOLD while in PRIVACY mode, no one but you can access the line on hold. Anyone trying to
access the line receives an error tone.
R
C
ELEASING A
ALL ON
Press the button for line on hold. The phone automatically goes into speakerphone mode.
NOTE: If you want to change modes, lift the handset to switch to the handset, or press the HEADSET button to use the headset.
NOTE: The call on hold can be picked up at any station using this procedure.
F
LASH
Use the FLASH button to activate custom calling services such as call waiting or call forwarding, which are available
through your local phone company.
R
EDIAL
1. Pick up the handset, or press SPEAKERPHONE, or a line button.
2. The line is automatically selected. (For headset, press the line you want to use.)
3. Wait for a dial tone then press REDIAL.
NOTE: The redial function will not operate if the number to be redialed contains more than 32 digits. If the number is
longer than that, you will hear an error tone.
R
R
EVIEWING THE
EDIAL
Your phone records up to six previously dialed phone numbers.
1. When the phone is idle, press the REDIAL button.
2. Use the REVIEW up or down arrow button to view the six previously dialed numbers.
3. While the preferred number is displayed, pick up the handset or press the SPEAKERPHONE, DIAL, or a line button
to dial the phone number.
NOTE: If you do not select a line button, the line is automatically seized and the number is dialed accordingly.
T
RANSFER
T
C
RANSFERRING A
ALL TO
1. With the caller on the line, press the TRANSFER button.
2. Press an Intercom/Memo Log button (1-16) that corresponds to the station you want to transfer the call to. The
line's indicator blinks yellow until the party picks up the transferred call. Once the call is picked up, the indicator
stays red. The indicator on the receiving party's line rapidly flashes red and rings.
OLD
H
OLD
N
UMBERS
A
S
NOTHER
TATION
15

Advertisement

Chapters

Table of Contents
loading

Table of Contents