Important Safeguards - Thane Housewares KB-6622V User Manual

IMPORTANT SAFEGUARDS
PLEASE READ CAREFULLY. FAILURE TO FOLLOW THE PRODUCT
INSTRUCTIONS WILL VOID YOUR WARRANTY.
READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER.
As with any electric appliance, basic precautions should always be observed when
using this product, including the following:
!
WARNING
1. Verify that the main voltage indicated on the product corresponds with the
voltage of your electrical outlet.
Rated voltage: 110~120V, 60HZ, 1300W
or
220~240V, 50/60HZ, 1300W
2. To provide continued protection against risk of electric shock, only connect to
properly grounded outlets.
3. This product is designed for domestic use only.
4. Do not use outdoors.
5. Do not leave the H2O MOP X5™ unattended while plugged in. Unplug the
electrical cord when not in use and before servicing.
6. Do not allow the H2O MOP X5™ to be used as a toy. Young children should
be supervised to ensure that they do not play with the appliance.
Close attention is necessary when used near children, pets or plants.
7. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are under supervision have been instructed how to
use the appliance by a person responsible for their safety.
8. Never direct steam towards people, animals or plants.
9. Do not immerse the H2O MOP X5™ in water or other liquids.
USER'S GUIDE USER'S GUIDE
3
TROUBLESHOOTING GUIDE
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, UNPLUG
APPLIANCE FROM OUTLET BEFORE SERVICING.
Problem Possible Cause
THE UNIT DOES NOT The unit is not plugged in
POWER ON or turned ON
REDUCED STEAM OR Water Tank empty
NO STEAM Blocked Steam Nozzle
Lime scale deposit
STEAM ESCAPES Attachment is not
FROM CONNECTIONS connected properly
Debris or obstructions at
the connection points
THE CLEANING CLOTH The cloth gets saturated
BECOMES WET with water
USER'S GUIDE
Solution
Make sure the unit is
plugged into a proper
outlet and the switch is ON ( I ).
Fill Water Tank
Remove Mop Head and
Clean the Nozzle.
Follow cleaning procedure
in this User's Guide to
remove lime scale.
Turn the unit OFF, allow it
to cool down, disconnect
the accessories and reattach
them properly.
Remove the accessory and
check and clean connection
points.
Remove wet cloth and
replace with a new
cleaning cloth (Optional
item) or allow cloth to cool,
then wring out and reattach.
32