Thane Housewares KB-6622V User Manual page 13

6) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug
the unit, refill the Water Tank and continue cleaning.
7) Once you finish cleaning, allow the Coral Cloth to cool down and carefully
remove it from the Window Cleaning Tool, as cleaning cloth could still be hot.
!
NOTICE
• Do not use the steam to clean frozen windows.
• Be careful when using the steamer on glass, as it may break.
GARMENT STEAMER
Make sure that the H2O MOP X5™ is unplugged.
1) Fill the Water Tank with water. Please refer to the "HOW TO USE THE H2O
MOP X5™" section in this manual
2) Install the Garment Steamer Cloth onto the Window Cleaning/Garment
Steaming Tool and attach the Window Cleaning/Garment Steaming Tool to the
Extension Hose as described in the "How To Assemble the Optional Accessories"
section in this manual.
3) Select one of the following Steam Regulator
positions: 1 – Low or 2 – Medium when using the Garment Steamer.
Do not use 3 – High and 4 - Hot Spray steam settings when using the
Garment Steamer.
You can change the Steam Regulator position and steam output while operating
the H2O MOP X5™.
4) Follow Step 3 described in the "How To Use the Hand-Hand Steamer"
section in this manual.
USER'S GUIDE
23
1) Fill the Water Tank with water:
!
CAUTION
Make sure that the H2O MOP X5™ is unplugged.
Turn the Water Tank cap counter-clockwise approximately 90° to the
"OPEN" position and remove the cap as illustrated in Fig. 1a, b and c.
1a 1b
Hold the mop at a 45° angle as illustrated in Fig. 1d and add water in the tank up
to the MAX level by using the measuring cup.
Do not overfill. The maximum tank capacity is 400 ML/13.5 OZ.
1d 1e
45º
USER'S GUIDE USER'S GUIDE
1c
1f
20 12