Table of Contents
Advertisement
£
¢ ¡
button on the Satellite Name option displays
Pressing the
OK
the satellite list in alphabetic order. Select the satellite toward
which your antenna is set to face. Even if you cannot find your
desired satellite, you can add your desired satellite to the satel-
lite list. See
§3.2
for a detailed description.
You have to specify which tuner is connected to your selected
satellite. If it is LNB 1 IN, set the Tuner Select option to Tuner
1; otherwise, set it to Tuner 2.
If you have connected the LNB 1 OUT and LNB 2 IN with a
loop-through cable, then set the Connection Type option to
Loop Through; otherwise, set it to Separated.
3.1 Searching for broadcasting services 19
The LNB (Low Noise Block converter)
is used to take a wide band of rel-
atively high frequencies, amplify and
convert them to similar signals that
is carried at a much lower frequency,
which is called Intermediate Frequency
(IF). High frequencies from satellites
are converted into 950 to 2150 MHz by
a LNB.
Select the Setting icon. Go to In-
stallation > LNB Setting menu to
configure the LNB settings. You
should see a screen like the left
figure.
Advertisement
Table of Contents
