Assembling The Antenna - RCA ANT3037X Installation Manual

Assembling the Antenna

Start by unfolding the VHF elements on the back assembly until the
elements are perpendicular to the boom (Figure 1). You should hear the
elements click into place.
Before
VHF Elements
Boom
Unfold the six UHF elements on the front assembly until they are
perpendicular to the boom. See Figure 2. You should hear the pieces click
into place. Pull the two phasing lines away from the boom.
Before Fol Fold out Elements
Boom
On the back assembly, remove the nut and screw from the plastic block
nearest to the open end of the boom and to the mast clamp (Figure 3).
Open End
of Boom
4
Figure 1
Elem m
Figure 2
Screw
Removal
Site
After
Boom
After
Boom
Figure 3
Unfolded
Elements
Phasing
Lines