Download Print this page

RCA ANT3900 User Manual

Amplified outdoor antenna vhf•uhf•fm.
Hide thumbs

Advertisement

RCA ANT3900
4/29/03
9:19
Designed for use
with single or
dual output LNB
satellite dish
antennas for sharp
local channel
reception
Limited One-Year Warranty
Page 1
User's Guide
Amplified
Outdoor Antenna
VHF•UHF•FM
ANT3900

Advertisement

   Related Manuals for RCA ANT3900

   Summary of Contents for RCA ANT3900

  • Page 1

    RCA ANT3900 4/29/03 9:19 Page 1 User’s Guide Amplified Outdoor Antenna VHF•UHF•FM Designed for use with single or dual output LNB satellite dish antennas for sharp local channel reception Limited One-Year Warranty ANT3900...

  • Page 2: Table Of Contents

    Before You Begin ........4 Installing Your New ANT3900 Antenna ....5 Step A: Installing the ANT3900 on your satellite dish .

  • Page 3: Important Safety Precautions

    RCA ANT3900 4/29/03 9:19 Page 3 Important Safety Precautions WARNING! Many do-it-yourself and professional antenna installers are injured or killed each year by electric shock. While anyone can see the obvious danger of falling, the most resourceful sometimes fail to recognize overhead wires as being potentially lethal.

  • Page 4: About Your New Ant3900 Outdoor Tv Antenna

    Page 4 About Your New ANT3900 Outdoor TV Antenna The ANT3900 is the perfect complement to a mini- satellite dish system. It picks up VHF and UHF signals, so you can enjoy local programming at no extra cost, along with your satellite programming.

  • Page 5: Installing Your New Ant3900 Antenna

    (see Fig 3). 3. Hold the antenna to the back of the dish so that the circular housing is centered with the RCA logo facing out (see Fig 2). 4. Maneuver the clamps over or around the edge of the dish one at a time (see Fig 4).

  • Page 6: Connect The Satellite Cables To The Terminals Marked Out 1 And Out 2 On The Ant3900 Antenna (see Fig

    (see Fig 5). 8. Connect the satellite cables to the terminals marked OUT 1 and OUT 2 on the ANT3900 antenna (see Fig 6). 9. Slide the black 32”antenna cables up through the satellite arm and connect to the LNB (see Fig 7).

  • Page 7

    RCA ANT3900 4/29/03 9:19 Page 7 Fig 5 Fig 6 Fig 7 Fig 8 Fig 9...

  • Page 8: Step B: Installing The Inside Diplexers

    5. Connect a coaxial cable (not supplied) from the satellite receiver’s “TV OUT” terminal to your television or VCR (see Fig 13). 6. Continue to “Step C: Setting Up Your TV to Use the ANT3900” (page 12). Fig 10 Fig 11...

  • Page 9: Rca Ant3900 4/29/03 9:19 Page

    RCA ANT3900 4/29/03 9:19 Page 9 Fig 12 Fig 13...

  • Page 10: Installing Ant3900 With A Multi-switch

    RG-6 coaxial cable. Installing ANT3900 with an Antenna Input Multi-switch 1. Follow “Step A: Installing the ANT3900 on Your Satellite Dish” on pages 5-7. 2. Locate your multi-switch and disconnect the satellite wire from the 18-volt (or Satellite “B”) terminal.

  • Page 11

    RCA ANT3900 4/29/03 9:19 Page 11 Fig 14 Fig 15 Fig 16...

  • Page 12: Installing Ant3900 With A Non-antenna Input Multi-switch

    “OUTPUT” or “TO RECEIVER” terminals. 1. Turn off and unplug all satellite receivers. 2. The ANT3900 will only work with a maximum of two satellite receivers in this application. Before proceeding with the installation, determine which two receivers you would like to attach to the ANT3900.

  • Page 13

    RCA ANT3900 4/29/03 9:19 Page 13 Fig 17 Fig 18...

  • Page 14: Limited One-year Warranty

    This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. ©2003 THOMSON INC. 10330 North Meridian Street Indianapolis IN 46290 Made in China. ANT3900 US IB REVA Trademark(s) ®Registered. Marca(s) Registrada(s). www.rca.com...

  • Page 15

    RCA ANT3900 4/29/03 9:19 Page 15...

  • Page 16

    RCA ANT3900 4/29/03 9:19 Page 16...

Comments to this Manuals

Symbols: 0
Latest comments: