CyClone Elliptical Trainer Owner's Manual page 7

ASSEMBLY INSTRUCTIONS
STEP 8
"L"
There is a decal on the
LEFT HANDLEBAR(6)
Insert the
BOLTS(M6 x 35mm)(66)
STEP 9
MOUNTING BRACKET(84)
Attach the
SCREWS
(M5 x 12mm)(59).
STEP 10
ADAPTER(83)
Connect the
ADAPTER(83)
drawing. Plug the
NOTE: ELLIPTICAL
The
power source.
plugged into an electrical outlet.
LEFT HANDLEBAR(6),
onto the
NYLOCK NUTS(M6)(73).
and
WATER BOTTLE(85)
Place the
into the outlet located on the base of the
into an electrical outlet.
ADAPTER(83)
can use the
To save battery power, use the
"R"
and a
LEFT PIVOTING ARM(8)
Repeat on the right side.
UPRIGHT(4)
onto the
MOUNTING BRACKET(84).
into the
or the batteries in the
ELLIPTICAL
7
L
RIGHT HANDLEBAR(7).
decal on the
and secure with
ROUND HEAD
with
MAIN FRAME(1),
COMPUTER(33)
with the
R
ROUND HEAD
refer to the inset
as a
ADAPTER(83)